Steel cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system in order to convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 5 mm
Material: steel
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Manufacturer | MBR |
| Area of application | Tuning |
| Material | Steel |
| Surface | raw |
| Width | 48 mm |
| Thickness | 5 mm |
| Mounting type | Screws |
| Total length | 72.5 mm |
| Ø mounting hole | 6.3 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 35 mm |
| Puch |
Accessories & related products
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 247,00
Not in stock
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -60 - 300 °C · Gap dimension (max.): 2 mm
EUR 26,90
EUR 384,29/l
Explore categories from Carburetor & intake system
Moped fans also bought
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Area of application: High End · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Width: 49 mm · Mounting type: Screws · Ø mounting hole: 6.6 mm · Total length: 77 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 34.8 mm
EUR 135,20
Not in stock
Stage6 R/T RT-PWK 21 mm carburetor "Black-Edition"
Nominal diameter: 21 mm · Manufacturer: Stage6 R/T · Area of application: Tuning · Component group Carburetor: Carburetor complete · Surface: varnished · Color: black · Carburetor type: RT-PWK · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 196,40
MBR piston 46.94 mm Gilardoni italkit GME | Puch
Nominal diameter: 47 mm · Manufacturer: MBR · Manufacturer: Wössner · Surface: molybdenum-coated · Ø outside piston (A): 46.94 mm · Compression height (C): 21.5 mm · Curvature (D): 2.63 mm · Total piston height (E): 48.15 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1 mm · Weight piston kit: 97 g
EUR 139,90
Working late? Evening hours on Thursday until 20:00
