profile
All wishlists Community wishlists
Hot Hot
Carousel Image 1
Carousel Image 2
logo_swiing ingenious parts

For: Puch

17984

swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch

EUR 45,80

Incl. 20% VAT.

Description

Wheel axle with closed groove ball bearings (Ø 29 mm) for the rear spoke wheel on your Puch moped / moped.

The rear wheel axle includes all required washers, nuts and spacer bushes.
The dimension of the long spacer sleeve is 78.5 mm.

The colored markings clearly show you which component is mounted in which position:

  • Green marking brake anchor plate
  • Blue marking: swing arm
  • Red marking: wheel hub

Note: When mounting the ball bearings, make sure that the long spacer bushing is clamped between the two bearings without any play. This is the only way to ensure that the inner rings of the bearings press correctly onto the bushing. If this is not observed, the bearings will inevitably become distorted.

Manufacturerswiing® ingenious parts
Ø inside12 mm
Thread length29 mm, 53 mm
Ø outside29 mm
Ø shaft19 mm
Diameter29 mm
Total length190 mm
MaterialSteel
Surfacegalvanized (blue)
Thread typeMF12x1 (fine pitch thread)
Shank length100 mm
Ball bearing closedYes
Width across flats19 mm
Puch

Accessories & related products

Nut M12x1 x 10 SW19 Wheel nut galvanized

For: Universal · Puch · Sachs

10422

Nut M12x1 x 10 SW19 Wheel nut galvanized

Drive: External hexagon · Height: 10 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Nominal diameter (thread): 12 mm · Thread depth: 10 mm · Width across flats: 19 mm · Area of application: Standard · Puch OEM number: 25015

EUR 2,35

Hot Hot
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
undefined

For: Puch

17081

swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats: 19 mm · Ball bearing closed: Yes

EUR 45,80

swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
undefined

For: Universal · Puch

22374

swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi

Bearing type: Deep groove ball bearing · Inner ring width: 9 mm · Manufacturer: swiing® ingenious parts · Ø inside: 12 mm · Dust protection type: 2RS - NBR contact seal on both sides · Ø outside: 29.02 mm · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Width: 9 mm · Material: Plastic · Material: Steel · Ball bearing closed: Yes

EUR 10,50

Inox
Nut M12x1 x 7 SW19 Wheel nut Inox

For: Universal · Puch · Sachs

25403

Nut M12x1 x 7 SW19 Wheel nut Inox

Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Height: 7 mm · Nominal diameter (thread): 12 mm · Width across flats: 19 mm

EUR 3,30

swiing® revival wheel nut M12x1 x 4 SW17 galvanized
undefined

For: Universal · Puch · Sachs · Tomos

26324

swiing® revival wheel nut M12x1 x 4 SW17 galvanized

Drive: External hexagon · Manufacturer: swiing® revival parts · Height: 4 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Nominal diameter (thread): 12 mm · Width across flats: 17 mm

EUR 3,40

swiing® revival spacer sleeve wheel axle 12.3x19x78.5 mm
undefined

Universal

26625

swiing® revival spacer sleeve wheel axle 12.3x19x78.5 mm

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.3 mm · Nominal diameter inside: 12 mm · Ø outside: 19 mm · Total length: 78.5 mm

EUR 8,10

swiing® revival spacer sleeve wheel axle 12.3x23x12 mm
undefined

Universal

26626

swiing® revival spacer sleeve wheel axle 12.3x23x12 mm

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.3 mm · Nominal diameter inside: 12 mm · Ø outside: 23 mm · Total length: 12 mm

EUR 6,95

Inox
66HEROES pointed nut "Spike" M5 - M12 Inox
undefined
angle-right

Universal

26340

66HEROES pointed nut "Spike" M12 Inox

Drive: External hexagon · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm · Nominal diameter (thread): 12 mm

EUR 8,10

Explore categories from Hub & axle

S-20-50-030-10_Achse
Axis
S-20-50-030-15_Lagerung
Storage
S-20-50-030-20_Distanzhuelsen
Spacer sleeves
S-20-50-030-30_Freilauf
Freewheel
S-20-50-030-40_Muttern
Nuts
S-20-50-030-50_Nabenkoerper
Hub shell
S-20-50-030-60_Radspanner
Wheel tensioner
S-20-50-030-70_Schrauben-Sicherung
Screws & fuse

Moped fans also bought

Hot Hot
GPO control bearing set M26x1 | Puch
undefined

For: Puch

10077

GPO control bearing set M26x1 | Puch

Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: MF26x1 (fine pitch thread) · Ø mounting frame: 31 mm · Ø inside: 26.8 mm · Ø outside: 41 mm · Color: silver

EUR 14,00

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

EUR 13,50

EUR 30,00/l

Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10371

Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube

Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Wheel size: 16 - 17 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve · Alternative version of the Puch OEM number: 567.060700 · Alternative version of the Puch OEM number: 901.0863 · Alternative version of the Puch OEM number: 902.0853

EUR 12,40

Rim tape blue 17" (protection for inner tube)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10994

Rim tape blue 17" (protection for inner tube)

Manufacturer: Made in Germany · Material: Rubber · Color: blue · Wheel size: 17 " · Width: 23 mm · Total length: 1280 mm

EUR 4,10

Hot Hot
swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch
undefined

For: Puch

17081

swiing® ingenious wheel axle with bearing conversion kit spoke hub front | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats: 19 mm · Ball bearing closed: Yes

EUR 45,80

Hot Hot
Inner cable set automatic | Puch E50
undefined

For: Puch

18185

Inner cable set automatic | Puch E50

Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears

EUR 11,70

Hot Hot
Polini brake shoes Ø 80 x 18 | Puch Maxi
undefined

For: Puch

21718

Polini brake shoes Ø 80 x 18 | Puch Maxi

Color: silver · Manufacturer: Polini · Width: 18 mm · Springs included: Yes · Ø locating bolt: 10 mm · Slotted: No · Number of springs: 2 pcs · Ø drum: 80 mm · Area of application: Tuning

EUR 23,40

Hot Hot
swiing® ingenious brake shoes Ø 80 x 18 Racing slotted
undefined

Universal

23300

swiing® ingenious brake shoes Ø 80 x 18 Racing slotted

Color: silver · Manufacturer: swiing® ingenious parts · Width: 18 mm · Springs included: Yes · Ø locating bolt: 10 mm · Slotted: Yes · Number of springs: 2 pcs · Ø drum: 80 mm · Area of application: Racing

EUR 23,40

swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch
undefined

For: Puch

30386

swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 34.5 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats: 19 mm · Ball bearing closed: Yes

EUR 45,80