Hot 
World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust outlet.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and significantly reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Displacement: 75 ccm · Hole spacing inlet: 46 mm · Ø cylinder neck: 49.5 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø outlet inside: 28 mm · Ø piston pin (B): 12 mm · Inlet window: 29 x 16 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing outlet: 45 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 364,70
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Number of jaws: 3 pcs · Number of springs: 3 pcs · Recording type: Cone mounting · Thickness: 20.3 mm · Ø outside: 93 mm · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Area of application: Racing
EUR 352,90
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Displacement: 75 ccm · Hole spacing inlet: 35.5 mm · Ø cylinder neck: 51 mm · Hole spacing inlet: 60 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø Inlet inside: 18.3 mm · Ø outlet inside: 26.5 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 247,00
Not in stock
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 294,10
Hot
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
EUR 294,10
Polini CP 23 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 23 mm · Carburetor type: CP · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Mounting type: Plug connection clamped · Nozzle size: 110 · Ø Inside entrance: 23 mm · Ø Output inside: 23 mm · Total length: 71.3 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Width: 66 mm · Vacuum connection: Yes · Height: 136 mm · Choke control: Hand choke · Size of secondary nozzle: 40 · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 176,40
Explore categories from Exhaust system
Moped fans also bought
VOCA silencer black with 3-point mount
Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Surface: anodized · Color: black · Ø bolt circle: 46 mm · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø inside: 20.3 mm · Total length: 220 mm · Total length: 235 mm
EUR 105,80
VOCA silencer red with 3-point mount
Thread type: M6x1 (standard thread) · Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Surface: anodized · Color: black · Color: red · Ø bolt circle: 46 mm · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø inside: 20.3 mm · Total length: 220 mm
EUR 105,80
Working late? Evening hours on Thursday until 20:00
