Racing air filter with solid plastic housing and red foam insert.
The air filter has a centric connection, as shown in Figure 3.
Fits all Dell'Orto PHBG carburetors. Is screwed directly onto the thread of the carburetor.
Can therefore be fitted without any problems even in tight spaces.
The housing can be easily opened to clean the filter.
Ø external air filter height: 80 mm
Height air filter height: 45 mm
Ø carburettor connection: 31 mm (with thread)
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Camouflaged | No |
| Color | black |
| Thread type | MF32x1.25 (fine pitch thread) |
| Filter type | Foam |
| Height | 45 mm |
| Ø Internal connection | 31 mm |
| Ø outside | 80 mm |
| Area of application | Tuning |
| Mounting type | Screws |
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø Pin: 3.94 mm · Ø bore: 4 mm · Color: gray
EUR 14,70
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23.5 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes
EUR 117,50
- 16 %
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Thread length: 12 mm · Total length: 30 mm · Diameter: 5.95 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
EUR 2,10
EUR 1,75
GPO 17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Color: black · Carburetor type: PHBG AS · Nominal diameter: 17.5 mm · Mounting type: Bride · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 80 · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Total length: 71.5 mm · Width: 63 mm · Height: 130 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle block: 262AU · Camouflaged: No · Size of secondary nozzle: 50
EUR 94,00
Polini 47 mm cylinder kit | Minarelli V1
Manufacturer: Polini · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 18.3 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 38.5 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 46 x 46 · Decompressor: none · Camouflaged: No
EUR 247,00
Working late? Evening hours on Thursday until 20:00
