
Racing air filter made of blue foam suitable for Dell'Orto PHBG carburetors on your moped, moped or small motorcycle in the size class 12 - 21 mm.
The fine-pored foam retains impurities and at the same time ensures very good air flow. The short version of this intake filter is particularly recommended where space around the carburetor is limited. For an improved filter effect and a longer service life, it is advisable to spray the filter with air filter oil.
| Manufacturer | GPO |
| Color | blue |
| Width | 82.5 mm |
| Total length | 75 mm |
| Filter type | Foam |
| Length rubber part | 19 mm |
| Length of filter section | 46 mm |
| Mounting type | Bride |
| Ø Internal connection | 35 mm |
| Area of application | Tuning |
| Camouflaged | No |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Width: 70 mm · Total length: 82 mm · Height: 124 mm · Nominal diameter: 19 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Area of application: Racing · Area of application: Tuning · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Size of secondary nozzle: 45
EUR 141,10
Dell'Orto 21 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Width: 72 mm · Total length: 82 mm · Height: 125 mm · Nominal diameter: 21 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 92 · Area of application: Tuning · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 141,10
GPO 17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Width: 63 mm · Total length: 71.5 mm · Height: 130 mm · Nominal diameter: 17.5 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Bride · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 80 · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 94,00
Dell'Orto 17 mm PHBG AS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Width: 66 mm · Total length: 71.6 mm · Height: 123 mm · Nominal diameter: 17 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 78 · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 147,00
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Width: 71 mm · Total length: 71.5 mm · Height: 123 mm · Nominal diameter: 19.5 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 85 · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle block: 262AU · Size of secondary nozzle: 50
EUR 94,00
GPO 21 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Width: 73 mm · Total length: 71.5 mm · Height: 130 mm · Nominal diameter: 21 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Bride · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 90 · Area of application: Tuning · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle block: 262A · Size of secondary nozzle: 50
EUR 94,00
EUR 84,60
Explore categories from Carburetor & intake system
Moped fans also bought
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Total length: 830 mm · Ø Silencer: 60 mm · Mounting type: Welded lug · Ø outside: 95 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Ø Internal connection: 23 mm · Flame tube attachment: Flange
EUR 217,60
swiing® ingenious intake manifold Gilardoni italkit Inox
Ø inside: 21 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Ø External connection: 24 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Total length: 80 mm · Area of application: Tuning · Total height: 55 mm · Height flange center hole: 42.5 mm · Hole pattern [mm]: 60 x 35
EUR 79,90








