swiing® ingenious EVO ignition

Thanks to a flywheel weighted as standard, it has a smoother idle than conventional racing ignitions. Thanks to its fine balancing, it keeps vibrations low even at high speeds. The stator was designed to withstand high heat loads so that no failures occur even at full power. Care has also been taken to ensure that the ignition is always easy to install and adjust. This makes it probably the most reliable racing ignition on the market.

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Kreidler · Zündapp

32719

swiing® ingenious EVO flywheel

Manufacturer: swiing® ingenious parts · Material: Steel · Ø Internal flywheel: 63.5 mm · Weight: 390 g · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: any · Height: 38 mm · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Thread length: 9 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 75 mm

EUR 101,30

Inox

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos

32737

swiing® ingenious 280 g additional weight EVO Inox

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: electropolished · Weight: 280 g · Ø bolt circle: 48 mm · Ø bolt circle: 54 mm · Ø outside: 95 mm · Ø mounting hole: 6.2 mm · Number of fixing points: 3 pcs · Thickness: 12 mm · Ø inside: 39 mm · Area of application: Tuning

EUR 56,20

For: Puch · Sachs · Zündapp Belmondo · Kreidler · Zündapp

32724

swiing® ingenious EVO stator

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Tension: 12 V · Performance: 60 W · Ø bolt circle: 80 mm · Ø outside: 94 mm · Number of cables: 4 pcs · Cable length: 620 mm · Cable length: 700 mm · Number of fixing points: 4 pcs · Ø inside: 28 mm · Area of application: Tuning

EUR 123,90

Inox

For: Puch · Sachs · Zündapp Belmondo

32738

swiing® ingenious 250 g additional weight EVO Inox | Sachs 503 / Puch Velux / Zündapp Belmondo

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: electropolished · Weight: 250 g · Ø bolt circle: 100 mm · Ø outside: 120 mm · Ø mounting hole: 5 mm · Number of fixing points: 4 pcs · Thickness: 5 mm · Ø inside: 75 mm · Area of application: Tuning

EUR 29,10

Inox

For: Puch · Sachs · Zündapp Belmondo

32736

swiing® ingenious 100 g additional weight EVO Inox | Sachs 503 / Puch Velux / Zündapp Belmondo

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: electropolished · Weight: 100 g · Ø bolt circle: 100 mm · Ø outside: 120 mm · Ø mounting hole: 5 mm · Thickness: 2 mm · Number of fixing points: 4 pcs · Ø inside: 75 mm · Area of application: Tuning

EUR 22,40

For: Puch · Sachs · Zündapp Belmondo

32735

swiing® ingenious EVO ignition coil

Manufacturer: swiing® ingenious parts · Color: black · Ø cable holder: 7 mm · Mounting type: Nuts & bolts · Height: 50 mm · Total length: 80 mm · Ø mounting hole: 6.5 mm · Cable length: 480 mm · Number of fixing points: 2 pcs · Hole spacing: 62 mm · Area of application: Tuning

EUR 67,50

For: Universal · Puch · Sachs · Zündapp Belmondo

32734

swiing® ingenious EVO CDI Box

Manufacturer: swiing® ingenious parts · Material: Plastic · Color: black · Width: 42 mm · Height: 30 mm · Total length: 75 mm · Ø mounting hole: 6.6 mm · Number of fixing points: 1 pcs · Area of application: Tuning

EUR 101,30

Set

For: Tomos

33295

swiing® ingenious EVO ignition | Tomos

Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning

EUR 281,70

swiing® ingenious drive pinion cable starter EVO, HPI | Puch E50

For: Puch

24821

swiing® ingenious drive pinion cable starter EVO, HPI | Puch E50

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Ignition system: HPI · Number of fixing points: 3 pcs

EUR 47,20

swiing® ingenious EVO ignition | Puch E50, Z50

For: Puch

33513

swiing® ingenious EVO ignition | Puch E50, Z50

Manufacturer: swiing® ingenious parts · Ø Internal flywheel: 63.5 mm · Light coil voltage: 12 V · Mounting type: Screws · Tension: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Number of fixing points: 3 pcs · Ø Flywheel outside: 75 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning

EUR 281,70

Set

swiing® ingenious EVO ignition | Sachs 503

For: Sachs

33511

swiing® ingenious EVO ignition | Sachs 503

EUR 338,00

Hot

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Universal

18196

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Thickness: 1 mm · Area of application: Measuring tool

EUR 28,10

Set

swiing® ingenious EVO ignition | Puch X30 Velux

For: Puch

33509

swiing® ingenious EVO ignition | Puch X30 Velux

EUR 338,00

Set

swiing® ingenious EVO ignition | Zündapp 247 Belmondo

For: Zündapp Belmondo

33510

swiing® ingenious EVO ignition | Zündapp 247 Belmondo

EUR 338,00

swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

23463

swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Weight: 116 g · Height: 25 mm · Ø bolt circle: 48 mm · Ø outside: 110 mm · Ø mounting hole: 6 mm · Number of fixing points: 6 pcs · Ø inside: 39 mm · Alternative version of the Pony Spare part no.: A1026 · Alternative version of Sachs spare part no.: 0211 070 105

EUR 67,50

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

28496

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: Chrome · Surface: chrome-plated · Weight: 116 g · Height: 25 mm · Ø bolt circle: 48 mm · Ø outside: 110 mm · Ø mounting hole: 6 mm · Number of fixing points: 6 pcs · Ø inside: 39 mm · Alternative version of the Pony Spare part no.: A1026 · Alternative version of Sachs spare part no.: 0211 070 105

EUR 77,70

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

28497

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Weight: 116 g · Height: 25 mm · Ø bolt circle: 48 mm · Ø outside: 110 mm · Ø mounting hole: 6 mm · Number of fixing points: 6 pcs · Ø inside: 39 mm · Alternative version of the Pony Spare part no.: A1026 · Alternative version of Sachs spare part no.: 0211 070 105

EUR 70,30

Not in stock

swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50

For: Puch

23580

swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50

Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Surface: raw · Ignition system: HPI · Width: 135 mm · Height: 93 mm · Total length: 160 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm

EUR 169,00

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

27577

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Color: Chrome · Surface: chrome-plated · Weight: 87 g · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø outside: 120 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Ø inside: 39 mm

EUR 77,70

Not in stock

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

27576

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Weight: 87 g · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø outside: 120 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Ø inside: 39 mm

EUR 70,30

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

23464

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Weight: 87 g · Color: black · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø outside: 120 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Ø inside: 39 mm

EUR 67,50

swiing® ingenious 215 g additional weight EVO, HPI | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

30068

swiing® ingenious 215 g additional weight EVO, HPI | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Weight: 215 g · Number of fixing points: 3 pcs · Area of application: Performance

EUR 37,40

swiing® ingenious EVO racing ignition 12 V with light 60 W

For: Puch · Sachs · Zündapp Belmondo

31175

swiing® ingenious EVO racing ignition 12 V with light 60 W

Manufacturer: swiing® ingenious parts

EUR 281,70

swiing® ingenious EVO ignition | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

33512

swiing® ingenious EVO ignition | Sachs 502, 50/2, 50/3, 50/4

EUR 338,00

swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra

For: Puch · Sachs · Zündapp Belmondo

28509

swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Weight: 110 g · Ø bolt circle: 50 mm · Ø outside: 65 mm · Ø mounting hole: 6 mm · Number of fixing points: 4 pcs · Thickness: 9 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 41,00

Inox

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

23780

swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 250 g · Ø bolt circle: 101 mm · Ø outside: 117 mm · Ø mounting hole: 5 mm · Number of fixing points: 4 pcs · Thickness: 5 mm · Ø inside: 71.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 29,10

swiing® ingenious thread protection bushing M12x1

Universal

32469

swiing® ingenious thread protection bushing M12x1

Width across flats (trigger): 13 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 14 mm · Material: Steel · Surface: blue galvanized · Diameter: 16 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 25 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 12,30

swiing® ingenious thread protection bushing M12x1.25

Universal

32468

swiing® ingenious thread protection bushing M12x1.25

Width across flats (trigger): 13 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 15 mm · Material: Steel · Surface: blue galvanized · Diameter: 16 mm · Thread type: MF12x1.25 (fine pitch thread) · Total length: 25 mm · Width across flats Screw: 13 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 12,30

swiing® ingenious thread protection bushing M8

For: Universal · Piaggio

31021

swiing® ingenious thread protection bushing M8

Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Material: Steel · Surface: blue galvanized · Diameter: 12 mm · Thread type: M8x1.25 (standard thread) · Total length: 23 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 7,80

swiing® ingenious thread protection bushing M10x1

Universal

31019

swiing® ingenious thread protection bushing M10x1

Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Material: Steel · Surface: blue galvanized · Diameter: 14 mm · Thread type: MF10x1 (fine pitch thread) · Total length: 25 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 10,00

Not in stock

Page 1 of 2

More collections

GPO «Pomodoro» Tuningzylinder

The sun-ripened ‘Pomodoro’ tuning cylinder for Sachs 503 engines is the alternative to comparable racing kits and impresses with its freshness in the lower rev range as well as its powerful bite in the form of acceleration and pulling power. It also impresses with a juicy finish in the upper rev range.

Custom 17’ cast rims for Grimeca hubs

23_10-mklt-collection-swiing-17-vergaser-01msc

swiing® ingenious 17 mm SRF carburettor

The new swiing 17 mm carburettor gives you a real boost with its original look. Perfectly camouflaged on the outside, top performance for your moped on the inside. Available with matching intake manifold for Puch E50 and Z50.

Grippy tyres by Vee Rubber

From everyday tyres to studded and full slick. Founded in 1977, the Thai tyre manufacturer Vee Rubber offers a wide range of stylish tyre designs for every surface with an excellent price-performance ratio.

Mofakultwear helmets

Helmets from Mofakultwear don't just look good, they should be good too. That's why they are handmade in Italy. Our models are all ECE-R22.05 approved and are absolutely roadworthy. So that you always have a good feeling when cruising.