Not so nice 
Wheel bearing cone with M12 x 1 mm thread for front wheel and rear wheel on your moped, moped or small motorcycle.
Wrench width: 16.9 mm
Height: 14.5 mm
Ø outer: 20 mm
The track is suitable for 3/16" (Ø 4.78 mm), 7/32" (Ø 5.56 mm), 1/4" (Ø 6.35 mm) balls, but the pitch must be observed.
Corresponding bearing balls, wheel axles, wheel nuts and other attachments can be found in the accessories section.
Price per piece
Mäsig-läsig! – We strive to offer you the widest range of moped spare parts. However, this product is of rather poor quality and is not recommended by us. Should you nevertheless choose this item, we understand, but cannot offer you any guarantee or exchange.
These cones have a soft surface and are therefore not suitable for professional use.
High-quality alternatives can be found in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Ø ball [inch] / [mm] | 3/16" (4.78 mm), 7/32" (5.56 mm), 1/4" (6.35 mm) |
| Width across flats | 16.9 mm |
| Height | 14.5 mm |
| Ø outside | 20 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Height: 5.8 mm · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2,15
swiing® revival wheel axle M12x1 x 165 ball bearing galvanized version
Material: Steel · Total length: 165 mm · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Thread length: 40 mm · Thread length: 50 mm · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Shank length: 75 mm
EUR 15,30
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread) · Mounting type: Union nut
EUR 11,70
swiing® revival seal Float SRE, SRC, SRF, SRA
Material: Sealing paper · Ø inside: 41 mm · Manufacturer: swiing® revival parts · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3,30
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2000 mm · Area of application: Standard
EUR 4,05
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Height: 5.8 mm · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2,15
Collection only possible with online purchase and appointment.
