Socket axle M12x195 made of blackened steel for your moped, moped and small motorcycle.
The threaded shaft can be used for both front wheels and rear wheels. On one side, the axle has a chamfered double edge with a width of 8.1 mm
Note: The brushed surface does not provide permanent rust protection and should therefore be treated with rust inhibitor.
Rust sealant and matching nuts can be found in the accessories
Good-quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Material | Steel |
| Surface | burnished |
| Ø shaft | 11.8 mm |
| Shank length | 149 mm |
| Total length | 195 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Thread length | 25 mm, 21 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Nut type: Hexagon nut 1D · Drive: External hexagon · Height: 10 mm · Area of application: Standard · Thread type: MF12x1 (fine pitch thread) · Strength class: A2-70 · Width across flats: 19 mm
EUR 4,60
66HEROES cap nut M12x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Cap nut · Drive: External hexagon · Height: 26.2 mm · Width across flats: 17 mm · Surface: polished · Thread depth: 23.4 mm · Thread type: MF12x1 (fine pitch thread)
EUR 14,00
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Ø inside: 16.2 mm · Ø Bundle: 24.1 mm · Ø outside: 20.2 mm · Total length: 19 mm · Puch OEM number: 349.1.42.005.1
EUR 2,95
Nut M12x1 x 10 SW19 Wheel nut galvanized
Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Material: Steel · Nut type: Hexagon nut · Drive: External hexagon · Thread depth: 10 mm · Height: 10 mm · Strength class: 8 · Width across flats: 19 mm
EUR 2,35
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Mounting type: Screws · Total length: 50 mm · Ø mounting hole: 6 mm · Width: 27 mm · Height: 15 mm
EUR 41,00
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Nut type: Hexagon nut 1D · Drive: External hexagon · Height: 10 mm · Area of application: Standard · Thread type: MF12x1 (fine pitch thread) · Strength class: A2-70 · Width across flats: 19 mm
EUR 4,60
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Color: transparent · Color: white · Filter type: Plastic net · demountable: No · Ø inside: 3 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm · Total length: 23.4 mm · Total length: 50 mm · Ø outside: 20 mm
EUR 6,80
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø outside: 33 mm · Place of use: Crankshaft · Ø inside: 17 mm
EUR 10,50
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Surface: coated · Place of use: Pinion shaft · Width: 3.5 mm · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8,80
Collection only possible with online purchase and appointment.
