High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Material | Steel |
| Manufacturer | AKOA |
| Surface | blank |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Mounting type | Nuts |
| Total length | 940 mm |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Ø outside: 95 mm · Manufacturer: Simonini · Material: Steel · Surface: varnished · Total length: 830 mm · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 216,70
HOMOET Exhaust P6 Special (longer center section) | Puch
Material: Steel · Surface: blank · Total length: 935 mm · Manufacturer: HOMOET · Ø outside: 88 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 345,70
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Material: Steel · Surface: raw · Surface: varnished · Color: gray · Total length: 900 mm · Manufacturer: HOMOET · Ø outside: 88 mm · Mounting type: Tab · Number of fixing points: 2 pcs · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 334,00
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Material: Steel · Surface: blank · Total length: 940 mm · Manufacturer: AKOA · Mounting type: Nuts · Number of fixing points: 3 pcs · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone
EUR 398,40
Moped fans also bought
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8,70
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4,55
swiing® ingenious 45 mm cylinder kit 70 ccm CH12 camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23.6/21.2 x 14.7 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 111,20
EUR 117,10
Collection only possible with online purchase and appointment.
