High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Total length | 940 mm |
| Manufacturer | AKOA |
| Mounting type | Nuts |
| Material | Steel |
| Surface | blank |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Puch | E50 |
Ratings
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Mounting type: Welded lug · Ø Silencer: 60 mm · Ø outside: 95 mm · Total length: 830 mm · Ø Internal connection: 23 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 217,60
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø outside: 88 mm · Total length: 935 mm · Ø Internal connection: 24 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 347,00
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Mounting type: Tab · Ø Silencer: 50 mm · Ø outside: 88 mm · Total length: 900 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 335,20
AKOA Exhaust Streetpower "handmade" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Mounting type: Nuts · Ø Silencer: 60 mm · Total length: 940 mm · Ø Internal connection: 28 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone
EUR 400,00
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Total length: 28 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Area of application: Tuning · Color: blue · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Ø inside: 4.8 mm
EUR 21,10
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2,80
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1600 mm · Nipple length: 12 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2,80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2,35
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Height: 30 mm · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6,95
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Ignition system: BOSCH · Ignition system: DUCATI · Surface: chrome-plated · Color: Chrome · Color: black-matt · Height: 88 mm · Ø outside: 130 mm · Total length: 160 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm · Width: 150 mm
EUR 176,40
Airsal piston 46 mm | Puch
Manufacturer: Airsal · Ø outside piston (A): 45.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 46 mm · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Weight piston kit: 98 g
EUR 44,60
Polini CP 21 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nozzle block: 35-12 · Height: 132 mm · Nominal diameter: 21 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Rubber sleeve · Total length: 71 mm · Nozzle size: 100 · Ø Inside entrance: 42 mm · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Width: 66 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 40
EUR 164,60
Polini 43.5 mm cylinder kit reed valve with head | Puch
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 48 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Racing · Area of application: Tuning
EUR 470,60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
