Socket axle M11x180 made of heavy-duty, galvanized special steel with cones and nuts for various rear wheels with cast spokes on your Puch moped / moped.
The complete threaded shaft set is also equipped with the following parts:
- 3 pieces of M11 x 1 nuts (SW19 / 10 mm)
- 4 pieces of washers (11.2/20/2 mm)
- 2 pieces of swiing bearing cone M11 (D18 x H14.15 mm / SW15)
- 2 pieces of M11 x 1 nuts (SW17 / 4 mm)
- 1 piece of spacer (12.3/19x6 mm)
&p;reworked version of the previously offered wheel axle. Both the axle and the cones are made of high-quality material that can withstand high loads.
The ends of the wheel axle are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Other axle parts can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Width across flats SW | 19 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Manufacturer | swiing® revival parts |
| Thread length | 75 mm |
| Ø shaft | 10.95 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Total length | 180 mm |
| Shank length | 30 mm |
| Puch |
Accessories & related products
swiing® revival wheel axle set M11x180 mm spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 180 mm · Thread type: MF11x1 (fine pitch thread) · Thread length: 75 mm · Shank length: 30 mm · Ball bearing closed: No · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm
EUR 46,80
CIF wheel axle set M11x1 x 200 mm galvanized
Width across flats SW: 15 mm · Width across flats SW: 17 mm · Thread type: MF11x1 (fine pitch thread) · Manufacturer: CIF · Ball bearing closed: No · Thread length: 92 mm · Ø shaft: 10.3 mm · Material: Steel · Surface: galvanized (blue) · Total length: 200 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Shank length: 14.5 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
EUR 17,50
Bearing cone M11x1 mm
Width across flats SW: 15 mm · Thread type: MF11x1 (fine pitch thread) · Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø outside: 19 mm · Height: 12 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 9,25
66HEROES cap nut M11x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Surface: polished · Nut type: Cap nut · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Thread depth: 23.4 mm · Width across flats SW: 17 mm · Height: 26.2 mm
EUR 13,90
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Diameter: 17.95 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 51,40
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11,60
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Ø inside: 12 mm · Bearing type: Deep groove ball bearing · Ø outside: 28 mm · Ball bearing closed: Yes · Width: 8 mm · Area of application: Standard
EUR 6,90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 11,60
swiing® revival wheel axle set M11x1 x 180 cast rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 58,50
Collection only possible with online purchase and appointment.
