Spacer washer 16.6x31.2x1.0 mm for the left roller bearing on your moped / moped with Sachs engine and 15 mm pinion shaft (502, 50/2, 50/3, 50/4, 503) and for the right roller bearing on 50/3 & 50/4 engines.
Top quality, hardened and ground.
Ø inner: 16.6 mm
Ø outer: 31.2 mm
Thickness: 1.0 mm
Other accessories such as the bearing rollers and spacers for the pinion shaft can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: A1570
| Thickness | 1 mm |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | hardened & ground |
| Ø inside | 16.6 mm |
| Ø outside | 31.2 mm |
| Pony OEM number | A1570 |
| Sachs OEM no. | 0244 078 000 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
Accessories & related products
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Surface: coated · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Area of application: Standard · Width: 3.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8,80
Shaft seal FPM 14.96/31.5/3.5 Pinion shaft | Sachs 50/2, 503 (A1134)
Manufacturer: Sachs · Material: FPM - Fluororubber · Place of use: Pinion shaft · Ø inside: 14.96 mm · Ø outside: 31.4 mm · Temperature resistance (min.): -30 - 200 °C · Width: 3.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 200 · Sachs OEM no.: 0230 011 100
EUR 15,10
swiing® revival thrust washer 13.5/27.8/1 roller bearing right | Sachs 502, 50/2, 503 (A1548)
Thickness: 1 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 13.5 mm · Ø outside: 27.8 mm · Pony OEM number: A1547 · Pony OEM number: A1548 · Sachs OEM no.: 0244 039 000 · Sachs OEM no.: 3510 004 004
EUR 9,25
swiing® ingenious ball bearing pinion shaft 15.5/31.5/8 | Sachs 502 AML, 50/2 ML, 50/3, 50/4
Bearing cage: Sheet steel cage · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS1 - NBR contact seal on both sides · Material: Steel · Ø inside: 15.5 mm · Bearing type: Deep groove ball bearing · Ø outside: 31.5 mm · Ball bearing closed: Yes · Width: 8 mm
EUR 32,70
Moped fans also bought
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Place of use: Carburetor · Material: Rubber · Surface: raw · Color: black · Ø outside: 20 mm · Area of application: Standard · Ø inside: 17.2 mm · Cord thickness: 1.4 mm · Number of components: 1 pcs · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3,40
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Ø outside: 40 mm · Bearing type: Shoulder bearing · Width: 10 mm · Area of application: Standard · Surface: blank · Ø inside: 15 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29,20
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 13.3 mm · Hole spacing inlet: 32 mm · Number of components: 14 pcs · Area of application: Standard · Hole pattern [mm]: 60 x 40
EUR 46,80
swiing® revival shim set | Sachs 503, 502, 50/2, 50/3
Nominal diameter inside: 13 mm · Ø inside: 12.5 mm · Ø inside: 15.2 mm · Ø outside: 18 mm · Ø outside: 21 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 0.5 mm · Thickness: 1 mm
EUR 19,80
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Material: Steel · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Width: 8 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Ø outside: 35 mm · Bearing clearance: CN (standard) · Bearing type: Deep groove ball bearing · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø inside: 15 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 58,50
swiing® revival thrust washer 13.5/27.8/1 roller bearing right | Sachs 502, 50/2, 503 (A1548)
Thickness: 1 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 13.5 mm · Ø outside: 27.8 mm · Pony OEM number: A1547 · Pony OEM number: A1548 · Sachs OEM no.: 0244 039 000 · Sachs OEM no.: 3510 004 004
EUR 9,25
Collection only possible with online purchase and appointment.
