profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
swiing revival parts transparent

For: Pony / Cilo (Beta 521 & 512)

35727

swiing® revival rear wheel axle set | Pony Cross 521

EUR 50,50

Incl. 20% VAT.

Description

Complete wheel assembly for the rear wheel of your Pony Cross 521 moped.

The set includes all necessary washers, nuts, bushings, and bearings.

The rear wheel axle is made of heavy-duty special steel and can withstand the highest loads.

The colored markings show you where to install each part: 

  • green mark: brake anchor plate
  • blue mark: swing arm

You’ll find all individual parts, along with matching wheel clamps and bearing cups, in the accessories section.

A nostalgic product from the swiing® quality brand that meets the highest standards.

Manufacturerswiing® revival parts
Ball bearing closedYes
MaterialSteel
Surfacegalvanized (blue)
Diameter12 mm
Total length188 mm
Thread length19 mm
Ø shaft12 mm
Shank length159 mm
Thread typeMF12x1.25 (fine pitch thread)
Width across flats19 mm
Pony / Cilo (Beta 521 & 512)

Pony Cross 521 (frame)

Accessories & related products

Normio Small M12 Washer 13/24/2.5, Galvanized
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Tomos · Alpa Chopper / Turbo

17175

Normio Small M12 Washer 13/24/2.5, Galvanized

Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread size: M12 · Thickness: 2.5 mm · Nominal diameter inside: 12 mm · Nominal diameter (thread): 12 mm · Ø inside: 13 mm · Ø outside: 24 mm

EUR 1,40

Brake anchor plate rear wheel Grimeca | Pony Cross (P8359)
undefined

For: Sachs · Pony / Cilo (Beta 521 & 512)

19870

Brake anchor plate rear wheel Grimeca | Pony Cross (P8359)

Manufacturer: Pony · Ø External brake pads: 90 mm

EUR 182,30

Not in stock

Hot Hot
GPO wheel clamp 12 mm cranked reinforced (per piece)
undefined

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Bye Bike

22527

GPO wheel clamp 12 mm cranked reinforced (per piece)

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Cranking (offset): 6 mm · Ø inside: 13.1 mm · Total length: 75 mm · Thread length: 35 mm · Ø outside: 23.7 mm · Thread type: M6x1 (standard thread)

EUR 3,40

swiing® revival spacer sleeve 12.2/22/17 rear wheel axle | Pony Cross Beta 521 (P8380)
undefined

For: Pony / Cilo (Beta 521 & 512)

24447

swiing® revival spacer sleeve 12.2/22/17 rear wheel axle | Pony Cross Beta 521 (P8380)

Nominal diameter inside: 12 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.2 mm · Total length: 17 mm · Ø outside: 22 mm

EUR 9,75

swiing® revival spacer sleeve rear wheel axle 12.2/22(19)/22 mm | Pony Cross Beta 521 (P8379)
undefined

For: Pony / Cilo (Beta 521 & 512)

24448

swiing® revival spacer sleeve rear wheel axle 12.2/22(19)/22 mm | Pony Cross Beta 521 (P8379)

Nominal diameter inside: 12 mm · Ø Bundle: 19 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.2 mm · Total length: 22 mm · Ø outside: 22 mm

EUR 13,50

swiing® revival spacer sleeve 12.2/17/71.6 rear wheel axle | Pony Cross Beta 521 (P8381)
undefined

For: Pony / Cilo (Beta 521 & 512)

24459

swiing® revival spacer sleeve 12.2/17/71.6 rear wheel axle | Pony Cross Beta 521 (P8381)

Nominal diameter inside: 12 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.2 mm · Total length: 71.6 mm · Ø outside: 17 mm

EUR 23,40

Wheel axle M12x1.25 x 190 rear wheel | Pony Cross Beta 521 (P8358)
undefined

For: Pony / Cilo (Beta 521 & 512)

24472

Wheel axle M12x1.25 x 190 rear wheel | Pony Cross Beta 521 (P8358)

Manufacturer: Pony · Material: Steel · Surface: galvanized (blue) · Total length: 188 mm · Thread length: 18 mm · Ø shaft: 11.95 mm · Shank length: 160 mm · Thread type: MF12x1.25 (fine pitch thread) · Width across flats: 19 mm

EUR 26,50

Normio Nut M12x1.25, 10 mm, SW19, galvanized
undefined

Universal

27884

Normio Nut M12x1.25, 10 mm, SW19, galvanized

Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Height: 10 mm · Nominal diameter (thread): 12 mm · Thread type: MF12x1.25 (fine pitch thread) · Strength class: 8 · Width across flats: 19 mm

EUR 2,70

SKF 6001 2RSH Ball bearing 12/28/8
undefined

For: Universal · Puch · Sachs

29207

SKF 6001 2RSH Ball bearing 12/28/8

Bearing type: Deep groove ball bearing · Stock number: 6001 · Inner ring width: 8 mm · Manufacturer: SKF · Ball bearing closed: Yes · Dust protection type: 2RSH - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Width: 8 mm · Ø inside: 12 mm · Ø outside: 28 mm

EUR 15,20

SKF 6201 2RSH ball bearing 12/32/10
undefined

For: Universal · Puch · Sachs

29209

SKF 6201 2RSH ball bearing 12/32/10

Bearing type: Deep groove ball bearing · Bearing cage: Sheet steel cage ball-guided · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: SKF · Ball bearing closed: Yes · Dust protection type: 2RSH - NBR contact seal on both sides · Bearing clearance: CN (standard) · Width: 10 mm · Ø inside: 12 mm · Ø outside: 32 mm

EUR 11,70

swiing® revival front wheel axle set | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35668

swiing® revival front wheel axle set | Pony Cross 521

Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm · Ø shaft: 10.25 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Shank length: 27 mm · Thread length: 63 mm

EUR 41,10

Explore categories from Hub & axle

S-20-50-030-10_Achse
Axis
S-20-50-030-15_Lagerung
Storage
S-20-50-030-20_Distanzhuelsen
Spacer sleeves
S-20-50-030-30_Freilauf
Freewheel
S-20-50-030-40_Muttern
Nuts
S-20-50-030-50_Nabenkoerper
Hub shell
S-20-50-030-60_Radspanner
Wheel tensioner
S-20-50-030-70_Schrauben-Sicherung
Screws & fuse

Moped fans also bought

Hot Hot
KMC drive chain 415H (reinforced) 128L
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo

10040

KMC drive chain 415H (reinforced) 128L

Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Chain pitch: 1/2" x 3/16" · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm

EUR 14,70

Hot Hot
GPO wheel clamp 12 mm cranked reinforced (per piece)
undefined

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Bye Bike

22527

GPO wheel clamp 12 mm cranked reinforced (per piece)

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Cranking (offset): 6 mm · Ø inside: 13.1 mm · Total length: 75 mm · Thread length: 35 mm · Ø outside: 23.7 mm · Thread type: M6x1 (standard thread)

EUR 3,40

ESJOT freewheel 20 teeth (1A quality) | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

26883

ESJOT freewheel 20 teeth (1A quality) | Pony Cross 521

Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Color: silver · Number of teeth: 20 pcs · Chain pitch: 1/2" x 1/8" · Thread type: FG34.8 (1.37" 24G)

EUR 14,00

swiing® revival front wheel axle set | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35668

swiing® revival front wheel axle set | Pony Cross 521

Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm · Ø shaft: 10.25 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Shank length: 27 mm · Thread length: 63 mm

EUR 41,10

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35856

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521

Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 11.25 mm

EUR 34,70

swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35862

swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Total length: 154 mm · Thread type: MF11x1 (fine pitch thread)

EUR 46,90

swiing® ingenious wheel axle with bearing conversion kit front wheel 16" | Pony Cross 521
undefined
angle-right

For: Pony / Cilo (Beta 521 & 512)

35863

swiing® ingenious wheel axle with bearing conversion kit front wheel 16" | Pony Cross 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm · Ball bearing closed: Yes

EUR 70,50