Original crankshaft suitable for your Puch Maxi S / N, as well as Supermaxi LG1 moped / moped with a 1-speed E50 engine.
High-quality and precisely fitting standard crankshaft weighing 873 grams, which has proven itself in various load tests.
This crankshaft was designed for use in original engines and has an excellent balance ratio and good speed stability.
The solid connecting rod is provided with a more stable Ø 16 mm connecting rod bolt.
The needle bearing is included in the scope of delivery.
You can find the matching bearings and shaft seals in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Area of application | Standard |
| Cheek type | standard |
| Crankshaft stroke | 43 mm |
| Connecting rod length center-center | 90 mm |
| Total length of crankpin on clutch side | 74 mm |
| Total length crankpin ignition side | 66 mm |
| Ø crank webs | 69.9 mm |
| Thread type | MF10x1 (fine pitch thread), MF8x1 (fine pitch thread) |
| Ø Connecting rod eye | 15 mm |
| Thread length | 11 mm, 15 mm |
| Ø Bearing seat (clutch side) | 17 mm |
| Ø Bearing seat (ignition side) | 17 mm |
| Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
| Wide crank webs | 34 mm |
| Length 1st paragraph | 9 mm |
| Length 2nd paragraph | 14.5 mm |
| Length 3rd paragraph | 25 mm |
| Ø 1st step (on the coupling side) | 22 mm |
| Ø 2nd shoulder (on the clutch side) | 17 mm |
| Ø 3rd step (on the clutch side) | 15 mm |
| Length of shoulder (ignition side) | 26.3 mm |
| Weight | 873 g |
| Number of gears | 1 pcs |
| Puch | E50 |
Accessories & related products
swiing® revival crankshaft "original" with mounted bearings | Puch E50
Material: Steel · Manufacturer: swiing® revival parts · Cheek type: standard · Connecting rod length center-center: 90 mm · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 43 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Area of application: Standard · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Weight: 873 g · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs · Puch OEM number: 349.1.10.115.0 · Puch OEM number: 900.6203 · Puch OEM number: 900.6233 · Puch OEM number: 901.3801 · Puch OEM number: 902.3835
EUR 164,60
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Contents: 70 ml · Area of application: Chemistry · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm
EUR 23,40
EUR 334,29/l
swiing® ingenious crankshaft "High End" (+1 mm stroke) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Cheek type: Full cheeks · Material: Steel · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 970 g · Number of gears: 1 pcs · Area of application: High End
EUR 175,20
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Area of application: Chemistry · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm
EUR 26,90
EUR 384,29/l
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Diameter: 7 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Width across flats: 10 mm · Total length: 106 mm · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 23,40
DMP crankshaft "original" | Puch E50
Manufacturer: DMP · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 14.5 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Weight: 873 g · Number of gears: 1 pcs · Area of application: Standard
EUR 99,90
Explore categories from Engine block
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs
EUR 58,70
GPO gasket set | Puch E50
Material: Aluminum · Material: Fiber · Manufacturer: GPO · Material: Sealing carton · Material: Sealing paper · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Decompressor: Yes · Area of application: Standard · Number of components: 7 pcs
EUR 11,70
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8,70
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Drive: External hexagon · Height: 8 mm · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Width across flats: 17 mm
EUR 4,60
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11,70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
