
Bearing set and oil seal set for the Puch Maxi 1-speed E50 engine (new model).
This bearing set can be installed in the Puch Maxi S, N, and Supermaxi LG1 with catalytic converter engine, among others.
All ball bearings are from the high-quality NTN brand with standard clearance (not C3).
The shaft seals (commonly known as Simmerrings) are double-lipped.
Note: Suitable for crankshafts that do not have an enlarged oil seal seat on the clutch side and have a bearing with an 11 mm inner ring (as shown in Figure 2).
A nostalgic product from the swiing® brand that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Area of application | Tuning |
| Number of components | 7 pcs |
| Puch | E50 |
Accessories & related products
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 11,70
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Manufacturer: swiing® revival parts · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11,70
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Color: gray · Contents: 70 ml · Area of application: Chemistry · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 23,40
EUR 334,29/l
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Number of components: 3 pcs · Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Area of application: Special tool
EUR 46,90
Explore categories from Seals & gaskets
Moped fans also bought
GPO 3-Jaw Clutch "Original" | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm · Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Area of application: Original · Area of application: Standard · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs
EUR 58,70
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44
EUR 11,70
swiing® revival oil filler plug with sealing ring | Puch E50
Number of components: 2 pcs · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Total length: 14.6 mm · Drive: Slot · Screw head: Lens head · Nominal diameter (thread): 10 mm · Ø External head: 14 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4,60
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8,70
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Manufacturer: swiing® revival parts · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11,70






