Polini CP 19 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main jet: 90
Installed secondary jet: 40
Ø Nominal: 19 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 19 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Total length | 71 mm |
| Carburetor type | CP |
| Width | 66 mm |
| Mounting type | Rubber sleeve |
| Height | 132 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 90 |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 21.8 mm |
| Ø Air filter connection | 47 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle block | 35-12 |
| Camouflaged | No |
| Size of secondary nozzle | 40 |
| Area of application | Tuning, Racing, Performance |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: CP · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Nominal diameter: 17.5 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle size: 62 · Size of secondary nozzle: 40
EUR 164,60
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 46,90
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 46,90
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Total length: 83 mm · Nominal diameter: 26 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Ø Inside entrance: 26 mm · Width: 65 mm · Ø Output inside: 26 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
EUR 170,50
Polini CP 15 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Total length: 71 mm · Nominal diameter: 15 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Ø Inside entrance: 42 mm · Width: 66 mm · Ø Output inside: 21 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mounting type: Rubber sleeve · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle block: 35-12 · Size of secondary nozzle: 36
EUR 158,70
Polini CP 17.5 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Total length: 71 mm · Nominal diameter: 17.5 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Ø Inside entrance: 42 mm · Width: 66 mm · Ø Output inside: 21.5 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mounting type: Rubber sleeve · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle block: 35-12 · Size of secondary nozzle: 36
EUR 164,60
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
EUR 2,80
Inox
Hot
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Color: Chrome · Ø mirror surface: 107 mm · Total length: 360 mm · Ø mirror rod: 8 mm · Clamping diameter: 22 mm · Mirror rod length: 300 mm · Thread size: M8
EUR 32,80
Dell'Orto 17.5 mm PHBG carburetor cable choke
Manufacturer: Dell'Orto · Width: 75 mm · Height: 130 mm · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: PHBG · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Nominal diameter: 17.5 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Choke nozzle size: 55 · Nozzle size: 82 · Size of secondary nozzle: 55
EUR 147,00
Not in stock
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 46,90
Bumm mirror round Inox black
Mirror property: none · Manufacturer: Bumm · Material: Steel · Test mark: none · Surface: varnished · Thread type: M8x1.25 (standard thread) · Color: black-matt · Ø mirror surface: 98 mm · Total length: 350 mm · Ø mirror rod: 8 mm · Clamping diameter: 22 mm · Mirror rod length: 300 mm · Thread size: M8
EUR 35,20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
