Polini CP 17.5 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main nozzle: 80
Installed secondary nozzle: 36
Ø Nominal: 17.5 mm
Ø Connection air filter: 46 mm
Ø Connection intake manifold: 25 mm
Alternative racing carburetors, the sleeve for mounting and the matching nozzles can be found under accessories.
Quality product from the Italian manufacturer Polini.
Details
| Manufacturer | Polini |
| Material | Aluminum |
| Area of application | Tuning, Racing, Performance |
| Component group Carburetor | Carburetor complete |
| Nominal diameter | 17.5 mm |
| Carburetor type | CP |
| Choke control | Hand choke |
| Total length | 71 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 80 |
| Ø Inside entrance | 42 mm |
| Mounting type | Rubber sleeve |
| Ø Output inside | 21.5 mm |
| Ø Air filter connection | 47 mm |
| Mixed oil connection | Yes |
| Width | 66 mm |
| Vacuum connection | Yes |
| Height | 132 mm |
| Nozzle block | 35-12 |
| Camouflaged | No |
| Size of secondary nozzle | 36 |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Nominal diameter: 17.5 mm · Manufacturer: Polini · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Size of secondary nozzle: 40
EUR 164,30
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Drive: External hexagon · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 46,90
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Drive: External hexagon · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78
EUR 46,90
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Total length: 83 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nominal diameter: 26 mm · Nozzle size: 105 · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Width: 65 mm · Ø Air filter connection: 49 mm · Height: 155 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
EUR 170,10
Polini CP 15 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: CP · Total length: 71 mm · Choke control: Hand choke · Width: 66 mm · Height: 132 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 70 · Size of secondary nozzle: 36
EUR 158,40
Polini CP 19 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 19 mm · Carburetor type: CP · Total length: 71 mm · Choke control: Hand choke · Width: 66 mm · Height: 132 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21.8 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 90 · Size of secondary nozzle: 40
EUR 176,00
Moped fans like you also bought:
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Ø outside: 130 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Width: 150 mm · Ignition system: BOSCH · Ignition system: DUCATI · Total length: 160 mm · Height: 88 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
EUR 176,00
Not in stock
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Number of teeth: 40 pcs · Number of fixing points: 6 pcs · Ø bolt circle: 106 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 23,40
Fuel tap horizontal M16x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF16x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: straight · Mounting type: Union nut
EUR 15,10
Not in stock
Collection only possible with online purchase and appointment.
