profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
logo_sachs

For: Sachs

15068

Notched Pin Ø 4 x 16 mm, Original Shift Fork | Sachs 50/2

EUR 4,60

Incl. 20% VAT.

Description

Semi-round slotted pin for the shift fork on Sachs 50/2 engines with manual transmission.

Diameter: 4 mm
Length: 16 mm

Original Pony part number: A1791

Original Sachs part number: 0249 046 000

Ø outside4 mm
ManufacturerSachs
Total length16 mm
Pony OEM numberA1791
Sachs OEM no.0249 046 000
Sachs

50 (Fahrtwind, 1.25 / 1.5 hp, DE)

50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS)

Explore categories from Gearbox & housing (motor)

S-10-30-020-010_Anlauf-Passscheiben
Thrust & shim washers
S-10-30-020-020_Getriebe_Wellen
Gearboxes & shafts
S-10-30-020-030_Schaltmechanismus
Switching mechanism
S-10-30-020-040_Gehaeuseschalen
Housing shells
S-10-30-020-050_Kick_Pedal_Elektrostart
Kick- pedal- & electric start
S-10-30-020-060_Motoraufhaengung
Motor suspension
Flat gasket
Simmerrings
Seals & O-rings
Dichtsatz
Revisionsset

Moped fans also bought

Leonelli 6V voltage regulator (1A quality)
undefined

Universal

10970

Leonelli 6V voltage regulator (1A quality)

Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Width: 27 mm · Performance: 50 W · Type of current: Alternating current (AC) · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm · Total length: 50 mm

EUR 35,20

GPO sealing ring 12.8/19/2.4 shift/clutch lever | Sachs 50/2, 503 A3844
undefined

For: Sachs

15052

GPO sealing ring 12.8/19/2.4 shift/clutch lever | Sachs 50/2, 503 A3844

Manufacturer: GPO · Material: NBR · Ø outside: 19 mm · Thickness: 2.4 mm · Ø inside: 12.8 mm · Pony OEM number: A3844 · Sachs OEM no.: 0650 017 000

EUR 6,95

Clutch lever manual | Sachs 50/2, 50/3 (A1757)

For: Sachs

15066

Clutch lever manual | Sachs 50/2, 50/3 (A1757)

Material: Steel · Area of application: Standard · Pony OEM number: A1757 · Sachs OEM no.: 0248 058 301

EUR 28,60

Notched nail clutch lever Ø 3 x 20 | Sachs 50/2, 50/3, 50/4, 503 AB/ABL/2AL/2BL (A1784)
undefined

For: Sachs

15067

Notched nail clutch lever Ø 3 x 20 | Sachs 50/2, 50/3, 50/4, 503 AB/ABL/2AL/2BL (A1784)

Manufacturer: Sachs · Ø outside: 3 mm · Total length: 20 mm · Pony OEM number: A1784 · Sachs OEM no.: 0249 023 000

EUR 3,40

Rubber washer under notched nail | Sachs 50/2, 503 AB/AC/ABL (A3890)

For: Sachs

15073

Rubber washer under notched nail | Sachs 50/2, 503 AB/AC/ABL (A3890)

Material: Rubber · Ø inside: 3 mm · Ø outside: 10 mm · Height: 1.8 mm · Color: black · Pony OEM number: A3890 · Sachs OEM no.: 0660 002 000

EUR 2,80

Protective cap shift/clutch lever | Sachs 50/2, 503 2AL/2BL (A1687)

For: Sachs

16975

Protective cap shift/clutch lever | Sachs 50/2, 503 2AL/2BL (A1687)

Height: 2.4 mm · Ø inside: 14.15 mm · Ø outside: 20 mm · Material: Steel · Surface: galvanized (blue) · Pony OEM number: A1687 · Sachs OEM no.: 0246 012 000

EUR 4,60

Not in stock

Inox
swiing® revival locking plate drive wheel Inox | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A1717)
undefined

For: Sachs

17941

swiing® revival locking plate drive wheel Inox | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A1717)

Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 10.2 mm · Thickness: 0.5 mm · Number of lobes: 1 pcs · Ø outside: 23 mm · Pony OEM number: A1717 · Sachs OEM no.: A1717 · Sachs OEM no.: 0246 049 000

EUR 8,10

Hot Hot
swiing® revival Ø 9.5 mm wedge 4.5° pedal crank galvanized
undefined

Universal

19544

swiing® revival Ø 9.5 mm wedge 4.5° pedal crank galvanized

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 43 mm · Color: silver · Angle crank wedge: 4.5° · Ø outside: 9.5 mm · Thread type: M7x1 (standard thread)

EUR 4,60

Inox
Normio Notch Nail, Ø 3 x 8 mm, Stainless Steel
undefined

Universal

32776

Normio Notch Nail, Ø 3 x 8 mm, Stainless Steel

Ø bore: 2.8 mm · Ø Rivet pin: 3 mm · Ø External head: 5.2 mm · Manufacturer: Normio · Total length: 9.8 mm · Rivet pin length: 8 mm · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Piaggio OEM number: 2942, S.2942

EUR 1,40