Special exhaust for various Puch mopeds / mopeds which are equipped with a racing cylinder. The racing silencer fits cylinders with a narrow outlet.
This racing exhaust impresses with its solid construction and high-quality workmanship. The silencer is lined with stainless sheet steel (chrome steel).
Ideally, the tuning muffler should be used in conjunction with cylinder kits from 46 mm to exploit the full power.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the middle and upper speed range.
Mounting aids and other add-on parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Color | black |
| Exhaust type | Cone / double cone |
| Number of fixing points | 1 pcs |
| Flame tube attachment | Flange |
| Mounting type | Welded lug |
| Puch | E50 |
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Manufacturer: Metracite · Material: Gray cast iron · Surface: varnished · Displacement: 75 ccm · Nominal diameter: 47 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 398,40
Not in stock
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Camouflaged: No
EUR 199,20
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Area of application: Tuning
EUR 246,10
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Thickness: 3 mm · Area of application: Tuning · Hole spacing outlet: 42.5 mm
EUR 8,70
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
EUR 11,60
EUR 25,78/l
Simonini carbon exhaust | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø Internal connection: 24 mm · Ø Silencer: 60 mm · Ø outside: 90 mm · Mounting type: Welded lug · Total length: 875 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 257,80
Cable set cut with adjusting screws | Puch Maxi
Material: Brass · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Total length: 1830 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Quantity: 4 pcs · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Outer shell length: 1740 mm
EUR 40,90
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Material: Rubber · Overall length (A): 31.3 mm · Color: black · Ø Passage (B): 30.7 mm · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
EUR 15,10
Rear fender blank | Puch Maxi S, Supermaxi LG1 / LG2
Material: Steel · Surface: blank / oiled · Folding the ends: not folded · Folding the ends: open folded · Wheel size [inch]: 17 " · Shape of the mudguard: angular · Total length over ends: 420 mm · Scope: 480 mm · Wide mudguard profile: 73 mm · Wide mudguard profile: 75 mm · Height of mudguard profile: 30 mm · Height of mudguard profile: 60 mm · Mounting type: Weld · Color: silver · Total height from support surface to top edge: 110 mm
EUR 35,10
Collection only possible with online purchase and appointment.
