Special RC101410 needle sleeve designed for mopeds equipped with Sachs ABL automatic engines that feature the older generation of the clutch basket (up to engine number 9'504'769).
Note: The freewheel sleeve with dimensions 15.88/22.22/15.70, often referred to as a Torrington, is installed with the lettering facing inward so that it is not visible once pressed into place.
The bearing sleeve for newer clutch baskets (starting with engine number 9,504,770) can be found in the accessories section.
A quality product from the Japanese manufacturer Koyo.
| Stock number | RC101410 |
| Manufacturer | Koyo |
| Ø outside | 22.22 mm |
| Ø inside | 15.88 mm |
| Height | 15.7 mm |
| Sachs | 503 - ABL |
Accessories & related products
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Ø inside: 29.6 mm · Ø inside: 35.3 mm · Ø outside: 110.5 mm · Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Recording type: Interlocking · Number of slats: 3 pcs · Thickness: 3.8 mm · Area of application: Tuning · Number of springs: 9 pcs
EUR 505,90
Not in stock
Disk 19/26/0.3 Clutch | Sachs 503 AB, ABL (A5617)
Ø inside: 19.1 mm · Nominal diameter inside: 19 mm · Ø outside: 26 mm · Thickness: 0.3 mm · Tolerance: DIN 988 (-0.03 mm) · Manufacturer: Sachs · Material: Spring steel · Surface: Hardened · Pony OEM number: A5617 · Sachs OEM no.: 0244 171 003
EUR 3,40
Explore categories from Gearbox & housing (motor)
Moped fans also bought
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 51,70
Hot
GPO gasket set carburetor Bing SRE
Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
EUR 5,75
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Width: 3.5 mm · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8,85
Hot
swiing® revival clamp body reinforced | Sachs 503 AB, AC, ADV, ABL (A1196)
Manufacturer: swiing® revival parts · Material: Steel · Surface: Hardened · Ø inside: 19 mm · Height: 10.9 mm · Ø outside: 26.8 mm · Number of teeth: 24 pcs · Pony OEM number: A1196 · Sachs OEM no.: 0232 186 100
EUR 76,40
Working late? Evening hours on Thursday until 20:00
