Black M6 x 62 mm threaded bolt made of reinforced special steel, 62 mm long, for mounting cylinders and cylinder heads on various mopeds, mopeds, and small motorcycles.
Among other things, this threaded stud can be used for the 43 and 45 mm cylinder kits from the BAD ASS brand.
These stud bolts are also colloquially referred to as cylinder studs.
Price per piece.
You can find matching washers and nuts in the accessories section.
Good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Steel |
| Surface | blackened |
| Diameter | 5.3 mm |
| Total length | 62 mm |
| Thread type | M6x1 (standard thread) |
| Nominal diameter (thread) | 6 mm |
| Strength class | 10.9 |
| Thread length | 11.8 mm, 7.8 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,80
EUR 2.580,00/l
Normio M6 6.4/12/1.6 Galvanized Washer
Ø inside: 6.4 mm · Nominal diameter inside: 6 mm · Ø outside: 12 mm · Thickness: 1.6 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Hardness [HV]: 140 HV · Thread size: M6 · Pony OEM number: A4515 · Sachs OEM no.: 0944 142 002
EUR 0,45
Normio Spring Washer M6 6.2/11.8/1.6, Galvanized
Ø inside: 6.4 mm · Nominal diameter inside: 6 mm · Ø outside: 11.4 mm · Thickness: 1.8 mm · Manufacturer: Normio · Material: Spring steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Area of application: Standard · Thread size: M6
EUR 0,45
Normio M6 Galvanized Nut
Manufacturer: Normio · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: M6x1 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Height: 4.8 mm · Strength class: 8 · Width across flats: 10 mm
EUR 0,60
Explore categories from Screws & fastener sets
Moped fans also bought
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Ø outside: 108 mm · Manufacturer: BAD ASS · Material: Aluminum · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Ø cylinder: 41 - 43 mm · Area of application: Tuning · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5
EUR 176,40
BAD ASS 43 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 61 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 43 mm · Ø cylinder neck: 46 mm · Ø outlet inside: 28 mm · Ø Outlet outside: 40 mm · Hole spacing inlet: 31 mm · Number of fixing points: 4 pcs · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37
EUR 282,30
BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 67 ccm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Decompressor: No · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Thread outlet: MF40x1.5 (fine pitch thread)
EUR 388,20
BAD ASS cylinder head XL Ø 45-47 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Ø cylinder: 45 - 47 mm · Height: 61 mm · Ø outside: 85.5 mm · Ø outside: 108 mm · Number of fixing points: 4 pcs · Ø screw holder: 19.3 mm · Candle thread: short · Decompressor: M10x1.5 · Hole pattern [mm]: 47 x 47
EUR 164,60
BAD ASS 45 mm cylinder "Diablo" incl. head | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning · Crankshaft stroke: 42 mm · Displacement: 67 ccm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 28 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Decompressor: No · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Thread outlet: MF40x1.5 (fine pitch thread)
EUR 541,20
Working late? Evening hours on Thursday until 20:00
