15 mm tuning intake manifold for manual Puch X30 NS and NL mopeds as well as Puch Sprinter mopeds with Z50 engine.
The 15 mm bore of the intake manifold was placed in the corners towards the cylinder so that the intake flange perfectly matches the intake of various racing cylinders.
Hole spacing of stud bolts: 38 mm
Total height: 70 mm
Total length: 48 mm
Ø carburetor connection (outside): 20 mm
In contrast to cheap aftermarket products, both connection surfaces of this connecting piece are milled flat, which prevents false air from being drawn in.
Good, inexpensive standard replacement part. GPO – GOOD PARTS ONLY.
| Ø inside | 15 mm |
| Manufacturer | GPO |
| Camouflaged | No |
| Material | Aluminum |
| Total length | 48 mm |
| Area of application | Tuning |
| Number of fixing points | 2 pcs |
| Ø External connection | 20 mm |
| Mounting type | Screws |
| Hole spacing inlet | 38 mm |
| Total height | 70 mm |
| Height flange center hole | 60 mm |
| Puch | Z50 (X30 Sport) |
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Width: 50 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 76,40
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
EUR 2,10
swiing® revival nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 6 pcs · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
EUR 18,70
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread)
EUR 18,70
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Cord thickness: 1.4 mm · Surface: raw · Color: black · Number of components: 1 pcs · Ø outside: 20 mm · Area of application: Standard · Place of use: Carburetor · Ø inside: 17.2 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3,40
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Width: 50 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 94,00
swiing® revival nozzle set M3.5 (10 pcs. of your choice) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle thread: M3.5x0.6 (standard thread)
EUR 41,10
Explore categories from Carburetor & intake system
Moped fans also bought
Mushroom air filter foam black, Bing SRE (Ø=20 mm)
Material: Foam · Material: Metal · Material: Rubber · Area of application: Tuning · Ø outside: 61 mm · Filter type: Foam · Color: Chrome · Color: black · Length rubber part: 65 mm · Length of filter section: 40 mm · Total length: 105 mm · Ø Internal connection: 20 mm · Camouflaged: No · Mounting type: Bride · Mounting type: Plug connection clamped
EUR 11,70
Hot
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Camouflaged: No · Material: Rubber · Color: Chrome · Area of application: Tuning · Color: black · Filter type: Grille · Length rubber part: 63.5 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Length of filter section: 49 mm · Ø outside: 61 mm · Ø Internal connection: 20 mm · Total length: 113 mm
EUR 15,20
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
EUR 2,80
Hot
GPO 44 mm Cylinder Head Tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Ø cylinder: 44 mm · Height: 55 mm · Width: 125 mm · Surface: sandblasted · Total length: 135 mm · Area of application: Tuning · Candle thread: short · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: Yes
EUR 50,50
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Width: 50 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 94,00
swiing® ingenious carburetor set 15 mm (Bing SRE) | Puch X30 NS, NL
Component group Carburetor: Carburetor complete · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 125,80
Working late? Evening hours on Thursday until 20:00
