Original reproduction air filter for your Puch Maxi S / N moped / moped with standard Bing or swiing® SRE carburetor.
The complete air filter box is supplied pre-assembled. As usual from the factory, it has already been carefully sealed by hand with a silicone joint around the seam to minimize the risk of air leakage and make it easier to adjust the carburettor.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the original filter screen installed in the air filter.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 349.1.15.070.0, 349.3.15.070.0, 349.6.15.070.0
| Manufacturer | GPO |
| Color | black |
| Filter type | Standard sieve |
| Ø Internal connection | 20 mm |
| Mounting type | Plug connection clamped |
| Area of application | Original, Standard |
| Puch | E50 |
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents: 70 ml · Color: black · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 23,40
EUR 334,29/l
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nozzle size: 74 · Ø Air filter connection: 27.5 mm · Hole spacing inlet: 38 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Racing · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Clamping screw torque (max.): 4 N/m
EUR 211,70
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Ø cylinder: 38 mm · Surface: sandblasted · Total length: 135 mm · Number of fixing points: 4 pcs · Width: 125 mm · Height: 55 mm · Candle thread: short · Decompressor: No · Hole pattern [mm]: 44 x 44 · Area of application: Standard
EUR 38,70
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 920 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Ø outside: 58 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange
EUR 76,40
Hot
swiing® revival 12 mm carburetor "original" | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Color: gray · Total length: 65 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Width: 50 mm · Ø Output inside: 12 mm · Height: 108 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82,30
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Total height: 53 mm · Ø inside: 12 mm · Number of fixing points: 2 pcs · Total length: 45.5 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Ø External connection: 20 mm · Mounting type: Screws · Area of application: Original
EUR 41,10
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Camouflaged: Yes · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Surface: sandblasted · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9 mm · Ø outlet inside: 19 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Material: Aluminum · Decompressor: Yes · Outlet type: straight · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Area of application: Standard · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 152,90
Hot
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle thread: M3.5x0.6 (standard thread)
EUR 25,80
Working late? Evening hours on Thursday until 20:00
