Black anodized aluminium gearbox cover, suitable for your Puch moped / moped with E50 engine.
The gearbox cover is equipped with cooling fins to ensure optimum heat dissipation. The increased position of the oil filler hole makes it possible to fill 1.5 dl more oil, which further improves the cooling capacity.
The lid and the filler screw are included in the scope of delivery.
Note: The clutch cover fits both the standard clutch and the Tripple Clutch Racing clutch.
Other matching parts such as the complete Tripple-Clutch racing clutch can be found in the accessories section.
| Manufacturer | Made in Switzerland |
| Width | 116 mm |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Ø inside | 107 mm, 30 mm |
| Height | 38.5 mm |
| Ø outside | 116 mm |
| Number of fixing points | 4 pcs |
| Total length | 116 mm |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Number of components: 1 pcs · Ø outside: 116 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2,85
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard
EUR 2,85
Oil seal NBR 17/40/7 A DUO | Puch E50
Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Width: 7 mm · Ø inside: 17 mm · Temperature resistance (min.): -30 - 100 °C · Ø outside: 40 mm · Area of application: Standard
EUR 6,05
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Ø bore: 4.05 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock
EUR 22,40
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Number of components: 1 pcs · Ø outside: 116 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2,85
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 970 g · Number of gears: 1 pcs · Area of application: High End
EUR 272,40
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: MVT Allumage · Color: black-matt · Total length: 170 mm · Width: 150 mm · Number of fixing points: 2 pcs · Ø outside: 130 mm · Hole spacing: 138 mm · Height: 82 mm
EUR 177,60
Not in stock
Collection only possible with online purchase and appointment.
