12 mm replica carburetor for mopeds, mopeds and small motorcycles;with Sachs 502/1 A, 502/1 B, 502/1 AX, 502/1 AX, 502/1 A CH, 502/1 A DK, 502/1 A NL, 502/1 A S and 502/1 A SF engine (colloquially often called torpedo or rocket engine) which are equipped with a Bing 1/12/182, 1/12/194, 1/12/215 or 1/12/237 carburetor.
The 12 mm carburetor is intended for the 40 - 45 km/h versions.
The carburetor fits the following models, among others:
- Hercules CB1 City Bike, L50, MF1, MF2, MP1
- Rex Miniped, Miniped MK2
- Sparta Happy
- Motograziella
- Pony City
- KTM Hobby 1968 - 1972
The smaller 10 mm version, which is used for 25 - 30 km/h versions, can be found in the accessories section.
| Nominal diameter | 12 mm |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Ø Internal connection | 16 mm |
| Ø Air filter connection | 54.5 mm |
| Ø fuel hose connection | 6 mm |
| Total length | 65 mm |
| Sachs | 502 1A / 1B (torpedo) |
| Hercules | |
| KTM |
Ratings
Accessories & related products
Cylinder base and intake gasket | Sachs 502/1B
Manufacturer: Made in Germany · Material: Oiled paper · Number of components: 2 pcs · Thickness: 0.35 mm · Thickness: 0.55 mm · Hole spacing inlet: 30 mm · Hole pattern [mm]: 40 x 41 mm · Sachs OEM no.: 0250 139 000 · Sachs OEM no.: 0250 140 000
EUR 11,50
Not in stock
Piston 38 mm | Sachs 50/2 1A, 1B
Nominal diameter: 38 mm · Ø outside piston (A): 37.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Weight piston kit: 87 g · Sachs OEM no.: 0286 373 005
EUR 70,50
Piston 38.6 mm | Sachs 50/2 1A, 1B
Nominal diameter: 38.6 mm · Ø outside piston (A): 38.54 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Weight piston kit: 92 g · Sachs OEM no.: 0286 373 007
EUR 70,50
Carburetor Bing 1/10/99 (replica) | Sachs 50/2 1A, 1B
Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 10 mm · Ø Internal connection: 16 mm · Ø Air filter connection: 54.5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 56 · Total length: 65 mm · Sachs OEM no.: 0281 108 004
EUR 99,90
Explore categories from Carburetor & intake system
Moped fans also bought
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3,30
swiing® revival float axle Bing SRE, SRF, SRA, SRC
Manufacturer: swiing® revival parts · Material: Steel · Component group Carburetor: Adjusting screws, float, etc. · Surface: galvanized (blue) · Ø outside: 1.5 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 18 mm · Alternative version of the Pony OEM number: A4597 · Alternative version of the Sachs OEM number: 0962 078 000
EUR 3,40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
