Blade-cooled 43 mm (61 cc) cylinder kit with 12 mm piston pin, suitable for your Sachs 50, 502, 50/2, 50/3, 50/4 moped / moped.
The timing of the cylinder was kept rather low, which is characterized by a very nice torque in the lower speed range.
The racing cylinder kit without sealing includes cylinder & piston kit without gaskets.
- Grey cast iron tuning cylinder with & 43.0 mm bore
- Slot-controlled
- 17x15 mm intake, 31 mm stud spacing
- Optimized overflow channels
- 2-piece outlet
- Improved control times
- No spindling of the engine housing necessary (Ø cylinder neck 46.0 mm)
- Exhaust thread: M40 x 1.5 mm
- Hole pattern for stud bolts: 60 x 40 mm for CH engines
- Pre-drilled hole pattern for stud bolts: 51 x 40 mm for DE engines
- Cylinder head hole pattern: 37 x 37 mm
- Incl. Ø 43 mm piston from the Italian manufacturer -GOL-
Note: 60 mm long M6 stud bolts must be used to install the cylinder.
Full installation instructions are included.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
| Nominal diameter | 43 mm |
| Material | Gray cast iron |
| Number of fixing points | 4 pcs |
| Manufacturer | BAD ASS |
| Displacement | 61 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 46 mm |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 28 mm |
| Inlet window | 17 x 15 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 31 mm |
| Ø piston pin (B) | 12 mm |
| Area of application | Tuning |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Hole pattern [mm] | 60 x 40 / 51 x 40 / 37 x 37 |
| Camouflaged | No |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Ratings
Accessories & related products
swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Material: Steel · Total length: 23 mm · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 4.9 mm · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2,15
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Screw head: Hexagon · Total length: 34 mm · Area of application: Standard · Shank: Yes · Ø shaft: 5.85 mm · Shank length: 8 mm · Thread length: 22 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Strength class: 10.9 · Number of components: 12 pcs
EUR 5,80
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 98 mm · Number of fixing points: 4 pcs · Height: 50 mm · Ø screw holder: 19 mm · Total length: 127 mm · Hole pattern [mm]: 37 x 37 · Width: 95 mm · Candle thread: long · Decompressor: M10x1.5 · Area of application: Standard
EUR 81,20
41 mm cylinder head tuning | Sachs 50/3, 50/4 LKH
Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 128 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Candle thread: long · Decompressor: No · Area of application: Tuning
EUR 114,80
Not in stock
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5 · Area of application: Tuning
EUR 177,60
Moped fans also bought
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Nominal diameter: 17 mm · Material: Aluminum · Total length: 116 mm · Height: 99 mm · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Width: 86 mm · Choke control: without choke · Nozzle thread: MF7x0.75 (fine pitch thread) · Ø fuel hose connection: 6.2 mm · Mounting type: Stud bolts & nuts · Nozzle size: 76 · Hole spacing inlet: 31 mm · Area of application: Standard · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: Yes · Camouflaged: No · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 94,70
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing® revival parts · Total length: 132 mm · Width: 85 mm · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 17 mm · Mounting type: Flange · Height: 100 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 76 · Hole spacing inlet: 31 mm · Area of application: Standard · Area of application: Tuning
EUR 150,30
EUR 134,90
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5 · Area of application: Tuning
EUR 177,60
Collection only possible with online purchase and appointment.
