Gas cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing 85, 17, 18 carburettors.
These carburettors are installed on Puch X30 Sport, Puch Supermaxi LG1 & LG2, Sachs 503 ADV, as well as Sachs 504 / 535 mopeds.
The throttle cable guide tube has an M7 x 0.75 mm mounting thread.
You can find more carburetor elbows and throttle cables in the accessories section.
Details
| Height | 29 mm |
| Ø outside | 7 mm |
| Total length | 47 mm, 53.5 mm |
| Width across flats nut | 10 mm, 8 mm |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Thread type | MF7x0.75 (fine pitch thread) |
| Carburetor type | 85, 18 Catalyst |
| Angle | 90 ° |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 3,25
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 90 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 43 mm · Total length: 52 mm · Height: 27 mm · Width across flats nut: 7 mm
EUR 13,70
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 50 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 36.5 mm · Total length: 42 mm · Height: 40 mm · Height: 48 mm · Width across flats nut: 7 mm
EUR 13,70
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Angle: 40 ° · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 30.5 mm · Total length: 37.5 mm · Height: 57 mm · Height: 67 mm · Width across flats nut: 7 mm
EUR 13,70
swiing® revival 80° carburetor pipe bend M6x0.75
Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 °
EUR 7,95
BING 90° carburetor pipe bend M7x0.75 NOS
Height: 25 mm · Manufacturer: BING · Ø outside: 7 mm · Total length: 38 mm · Total length: 45 mm · Width across flats nut: 9 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF7x0.75 (fine pitch thread) · Carburetor type: 85 · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 28,70
90° carburetor pipe bend M7x0.75
Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: 18 Catalyst · Total length: 47 mm · Total length: 53.5 mm · Carburetor type: 85 · Height: 29 mm · Thread type: MF7x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Ø outside: 7 mm · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 13,70
swiing® revival 90° carburetor pipe bend M6x0.75
Height: 32 mm · Manufacturer: swiing® revival parts · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 °
EUR 7,95
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 3,25
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
EUR 11,40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø outside: 5 mm · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Drive: Slot · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
EUR 2,30
GPO 85° carburetor pipe bend brass M6x0.75
Height: 30 mm · Manufacturer: GPO · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 85 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6,80
Magura cable clamp Ø 6 x 9
Manufacturer: Magura · Ø outside: 6 mm · Total length: 9 mm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Thread type: M4x0.7 (standard thread) · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.5 mm · Screw head: Hexagon · Thread length: 5 mm · Number of components: 1 pcs · Width across flats SW: 6 mm · Area of application: Standard
EUR 2,30
Magura cable clamp Ø 7 x 9 mm
Manufacturer: Magura · Ø outside: 7 mm · Total length: 9 mm · Total length: 14.5 mm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Thread type: M4x0.7 (standard thread) · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.5 mm · Screw head: Countersunk head · Screw head: Hexagon · Thread length: 6 mm · Number of components: 1 pcs · Width across flats SW: 6 mm · Area of application: Standard
EUR 2,90
swiing® revival 90° carburetor pipe bend M6x0.75
Height: 32 mm · Manufacturer: swiing® revival parts · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 °
EUR 7,95
Collection only possible with online purchase and appointment.
