Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 280 mm
Outer diameter of coil spring: 49 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Hole spacing | 280 mm |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Ø outside | 49 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Universal |
| Tomos |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,90
EUR 2.590,00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Screw head: Hexagon · Drive: External hexagon · Thread type: M8x1.25 (standard thread)
EUR 21,20
MKX shock absorber 28 cm chrome
Number of fixing points: 2 pcs · Manufacturer: MKX · Ø outside: 46 mm · Color: Chrome · Material: Platinum · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 280 mm · Mounting type: Nuts & bolts
EUR 59,10
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Ø bore: 4 mm · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm
EUR 14,80
Inox
Hot
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 12,90
Not in stock
Hot
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Total length: 580 mm · Thread length: 57 mm
EUR 157,50
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Width: 730 mm · Height: 400 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 14 mm · Ø outside: 22 mm · Mounting type: Fork plate · Strut length: 320 mm
EUR 42,50
Handlebar fork plate 15 cm cross black
Material: Steel · Surface: varnished · Color: black · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Width: 710 mm · Height: 150 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Ø outside: 22 mm · Mounting type: Fork plate · Strut length: 230 mm
EUR 29,50
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Width across flats: 30 mm · Drive: External hexagon · Height: 13.8 mm · Thread depth: 12 mm · Thread type: MF26x1 (fine pitch thread) · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Area of application: Standard
EUR 11,70
Collection only possible with online purchase and appointment.
