The world has never seen pedals like these before!
The solid aluminum pedals can be folded in. This saves you a whole 6 cm.
This may not seem like much, but it can be crucial when space is tight or during transportation.
With non-slip tread with cams on both sides.
Thread: 9/16"
Length: 115 mm
Width: 85 mm
Height: 27 mm
The reflectors on the sides contribute to road safety.
We recommend mounting the folding pedals with Loctite threadlocker.
In addition, a flat fork wrench is required for assembly.
Both products can be found in the accessories section below.
Price per pair.
Included in delivery are two additional aluminum washers for spacing.
Quality product from the manufacturer wellgo.
| Manufacturer | wellgo |
| Surface | coated |
| Width | 85 mm |
| Thread type | FG14.3 (9/16" 20G) |
| Height | 27 mm |
| Total length | 115 mm |
| Reflectors | Yes |
| Material | Aluminum, Plastic |
| Color | black |
| Width across flats | 15 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,80
EUR 2.580,00/l
Moped fans also bought
Hot 
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Color: black · Color: silver · Number of fixing points: 1 pcs
EUR 11,70
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,70
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3,30
Transval speedometer drive 16" with bracket 11 mm axle (for VDO speedometer cable)
Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · 4-edge speedometer cable: 2.6 mm · Total height: 52 mm · Color: gray · Ø axle: 11 mm · Ø mounting hole: 11 mm · Thread type: MF10x1 (fine pitch thread) · Wheel size: 16 " · Overall width outside: 50 mm · Ø outside: 41 mm
EUR 32,80
Dell'Orto 12/12 SHA carburetor hand choke | Piaggio Ciao PX, C24
Nominal diameter: 12 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Color: black · Total length: 55 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 48 · Ø Inside entrance: 12 mm · Width: 60 mm · Ø Output inside: 12 mm · Height: 110 mm · Ø Air filter connection: 50.6 mm · Ø Internal connection: 16 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread)
EUR 76,40
Working late? Evening hours on Thursday until 20:00
