Chrome-plated racing exhaust with attached silencer suitable for various Puch mopeds / mopeds with a straight outlet.
This tuning exhaust delivers plenty of power and is also visually stunning.
The rearmost end of the resonance body is fitted with a screw. Two additional screws with different holes are included in the scope of delivery.
These can be replaced. This changes the exhaust back pressure and therefore the performance of the silencer.
This gives you an exhaust for the lower, middle and upper speed range all in one.
You can find more racing pipes in the accessories section.
Branded product from the Portuguese manufacturer TECNO.
| Manufacturer | TECNO |
| Material | Steel, Aluminum |
| Color | Chrome |
| Surface | chrome-plated |
| Ø Silencer | 60 mm |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 24 mm |
| Exhaust type | Cone / double cone |
| Total length | 900 mm |
| Puch |
Accessories & related products
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8,70
Hot
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Mounting type: Tab · Number of fixing points: 2 pcs · Ø Silencer: 50 mm · Ø outside: 88 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts · Total length: 900 mm
EUR 335,20
Explore categories from Exhaust system
Moped fans also bought
Hot
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Number of fixing points: 2 pcs · Ø outside: 130 mm · Hole spacing: 137.5 mm · Height: 88 mm · Width: 150 mm · Total length: 160 mm
EUR 176,40
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Inventory-managed: No · Manufacturer: Road Master · Tire width: 2.25 " · Color: black · Width: 2 1/4 " · Wheel size: 17 " · Old designation: 21 x 2.25 " · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4 P.R. · Tire type: Allround · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 38,20
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: Outer edge · Ø External head: 14 mm · Width across flats: 13 mm · Width across flats: 17 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Thread length: 13 mm · Number of components: 3 pcs · Total length: 32 mm · Area of application: Standard
EUR 15,20
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Area of application: Tuning · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 94,00
Hot
swiing® revival 12 mm carburetor "original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: gray · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Height: 108 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Camouflaged: No · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Total length: 65 mm · Area of application: Standard · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 82,30
Working late? Evening hours on Thursday until 20:00
