Tuning cylinder cover with optimized combustion chamber for blown cylinders of your Puch X30 NG-2AH, Puch X30 NG-2A, Puch X30 N-2A, Puch DS 50, Puch MV 50, Puch MC 50 mopeds, mopeds and small motorcycles with M6 cylinder stud bolts.
The FPM Viton sealing ring is temperature-resistant up to 200°C.
Please select the desired cylinder head with the corresponding diameter of 38, 40 or 41 mm in the selection field.
The cylinder head must be fitted together with the four centering sleeves included in the scope of delivery.
The centering bushes are used to ensure that the cylinder cover can be pushed onto the stud bolts in a perfectly centered position.
The bushes are pushed into the holes in the cylinder cover so that they protrude slightly above the sealing surface (see Figure 2 for an illustration).
We recommend gluing the guide bushes into the cylinder head with Loctite adhesive so that they do not move during assembly/disassembly.
The cylinder heads do not have a mount for fitting a decompressor.
Cylinder head dimensions (ØxH): 90 x 35 mm
Centring bolt dimensions:
Ø inner: 6.25 mm
Ø outer: 8 mm
Length: 26 mm
Material: anodized aluminium
Compatible cylinders, stud bolts, Loctite, etc. can be found in the accessories section. You can find them in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Details
Manufacturer | swiing® ingenious parts |
Area of application | Racing |
Ø cylinder | 38 - 41 mm |
Height | 35 mm |
Ø outside | 90 mm |
Number of fixing points | 4 pcs |
Decompressor | No |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: green · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Temperature resistance (min.): -75 - 150 °C · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
EUR 24,70
EUR 2.470,00/l
GPO cylinder 41 mm fan-cooled 10 mm KoBo | Puch X30 Velux, N-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: Meteor Racing · Material: Gray cast iron · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 123,90
GPO cylinder 41 mm fan-cooled 12 mm KoBo | Puch X30 Velux, N-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: Meteor Racing · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 43.2 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.6 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 123,90
Cylinder 38 mm fan-cooled 10 mm KoBo | Puch Velux, NG-2AH
Nominal diameter: 38 mm · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 101,30
Moped fans like you also bought:
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Mounting type: Screws · Tension: 12 V · Width: 27 mm · Performance: 100 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm
EUR 39,30
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Weight: 89 g
EUR 39,30
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Mounting type: Plug connection clamped · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Total length: 66 mm · Nozzle thread: M3.5 · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 90,10
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Area of application: Tuning · Hole spacing inlet: 38 mm
EUR 10,00
GPO 15 mm intake manifold | Puch (ZA50)
Manufacturer: GPO · Material: Aluminum · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Total length: 51.5 mm · Ø inside: 15 mm · Height flange center hole: 52.5 mm · Total height: 63 mm · Camouflaged: No · Area of application: Tuning · Hole spacing inlet: 32 - 38 mm
EUR 44,50
swiing® revival Set stud bolts M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 30 mm · Width across flats SW: 10 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
EUR 12,00