Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Place of use | left |
| Color | white |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Number of components: 2 pcs · Manufacturer: Magura · Thread length: 4 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread)
EUR 2,30
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Surface: burnished · Color: black · Material lever: Plastic · Ø inside: 22 mm · Total length: 94 mm · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Mounting type: Screws
EUR 57,10
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
EUR 2,75
swiing® revival decorative lever slotted mount left black (Magura)
Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Place of use: left · Surface: galvanized (blue) · Surface: raw · Color: black · Total length: 50 mm · Thickness: 1.2 mm · Height: 19.6 mm
EUR 28,50
Explore categories from Handles & fittings
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Number of components: 2 pcs · Manufacturer: Magura · Thread length: 4 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread)
EUR 2,30
Speedometer 60 km/h Ø 48 mm black / chrome
Color: Chrome · Color: black · Color: red · Color: white · Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Ø Receptacle: 48 mm · Maximum speed: 60 Km/h · Lighting: Light slit · Thread type: MF10x1 (fine pitch thread) · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Depth: 50 mm · Ø outside: 50.4 mm · Total height: 70 mm
EUR 68,50
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Type of current: Alternating current (AC) · Total length: 50 mm · Tension: 12 V · Width: 27 mm · Height: 15 mm · Performance: 100 W · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 39,90
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
EUR 2,75
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Total length: 250 mm · Width: 170 mm · Thickness: 0.4 mm · Ø inside: 86 mm · Number of fixing points: 16 pcs · Number of components: 1 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 6,75
Collection only possible with online purchase and appointment.
