Brake cam suitable for brake anchor plates on the front wheel of your Puch Maxi S & N moped.
This CNC turned part fits all old brake discs where the brake cams and the brake lever are bolted together.
The galvanized brake cam is in no way inferior to the original SGDG / LELEU brake cams in terms of workmanship and functionality.
Width of square: 9 x 9 mm
Width of diagonal: 6 mm
Total length: 38.2 mm
Thread: M6x1 mm
Material: steel
Surface: galvanized
Complete brake anchor plates, brake shoes and the cam for the rear wheel can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | M6x1 (standard thread) |
| Height | 38.2 mm |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) |
Accessories & related products
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Area of application: Standard · Number of components: 3 pcs · Total length: 32 mm · Thread type: MF10x1 (fine pitch thread) · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Thread length: 13 mm · Ø External head: 14 mm · Drive: Outer edge · Shank: Yes · Shank length: 9.5 mm · Ø shaft: 9.8 mm
EUR 15,10
Not in stock
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 91 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 187 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
EUR 81,90
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 88,20
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Thread length: 8 mm · Color: silver · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Mounting type: Nuts & bolts · Height: 5.3 mm
EUR 12,80
Magura cable clamp Ø 8 x 15 mm
Total length: 15 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Ø outside: 8 mm · Thread length: 7 mm · Width across flats SW: 7 mm
EUR 2,95
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Rear side texture: Adhesive · Color: black · Color: white · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 11,00
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Mounting type: Union nut · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
EUR 11,60
Collection only possible with online purchase and appointment.
