Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Color | Chrome |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Mounting type | Nuts & bolts |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
Ratings
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Height: 5.3 mm · Total length: 145 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm
EUR 12,80
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 70,50
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Wheel size: 17 " · Distance mudguard - center hole: 315 mm · Mounting type: Nuts & bolts · Wide intake: 65 mm · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Total length: 325 mm · Hole spacing: 19 mm
EUR 15,20
Not in stock
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 305 mm · Distance mudguard - center hole: 290 mm · Wide intake: 75 mm · Wheel size: 16 " · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Number of fixing points: 5 pcs · Mounting type: Nuts & bolts
EUR 19,90
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: black-matt · Surface: varnished · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 6 pcs · Total length: 147 mm · Width: 105 mm · Height: 6 mm
EUR 15,20
EUR 13,50
Not in stock
Explore categories from Mudguard
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Chain pitch: 1/2" x 3/16" · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14,70
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Height: 5.3 mm · Total length: 145 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm
EUR 12,80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Screw head: Lens head · Thread length: 4 mm
EUR 2,35
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 12,80
EUR 28,44/l
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
EUR 11,70
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Mounting type: Plug connection clamped · Camouflaged: No · Material: Plastic · Area of application: Tuning · Color: black · Width: 68 mm · Filter type: Racing screen · Height: 52 mm · Total length: 165 mm · Ø Internal connection: 20 mm
EUR 70,50
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 70,50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
