Complete resonance exhaust system / reso exhaust for your Tomos Sprint, Quadro, Classic and Roadie moped / moped.
Optically an ordinary cigar exhaust, but a counter cone is incorporated inside.
This turns the supposedly original silencer into a resonance exhaust. For all those who want to combine original looks with tuning. The special exhaust has a pleasant volume even at higher engine speeds.
Tailpipe dimensions:
- Outer diameter: 70 mm
- Internal connection diameter: 28 mm
- Outer connection diameter: 30 mm
- Total length: 73 cm
All individual parts such as clamps, seal and flame tube, which are required for the installation of the exhaust, are included in the scope of delivery.
Note: For proper installation, the exhaust manifold may need to be shortened slightly and the silencer pushed completely forward. It is also advisable to drill out the holes on the flange to 6.5 mm. During installation, please check that all nuts and bolts are sufficiently tight and tighten them if necessary.
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 24.4 mm · Ø outside: 28 mm · Total length: 325 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Total length: 730 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 130 mm · Hole spacing: 100 mm · Thickness: 4 mm · Number of fixing points: 2 pcs · Ø mounting hole: 8.3 mm, 20 mm
Material: Steel · Surface: galvanized (blue) · Ø inside: 29 - 31 mm · Width: 20 mm · Number of components: 1 pcs
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Nominal diameter: 70 mm · Clamping diameter: 66 - 70 mm · Width: 18 mm · Thickness: 2.5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 8.5 mm
Material: Graphite / Graphite, Steel · Ø inside: 26.5 mm · Ø mounting hole: 6.5 mm · Thickness: 2.6 mm · Place of use: Outlet · Number of fixing points: 2 pcs · Hole spacing: 42 mm · Manufacturer: swiing® ingenious parts
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Ø outside | 70 mm |
| Color | Chrome |
| Total length | 730 mm |
| Surface | chrome-plated |
| Mounting type | Screwed clamp |
| Flame tube attachment | Flange |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Tomos | Classic Quadro Sprint Roadie |
Ratings
Accessories & related products
Exhaust sidepipe 28 mm chrome | Tomos A3, A35
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 60 mm · Total length: 780 mm · Surface: chrome-plated · Flame tube attachment: Stud bolts & nuts · Ø Internal connection: 24.5 mm · Color: Chrome · Mounting type: Nuts & bolts · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Number of fixing points: 4 pcs
EUR 153,50
Hot 
Exhaust sidepipe 28 mm black | Tomos A3, A35
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 60 mm · Total length: 780 mm · Surface: chrome-plated · Flame tube attachment: Stud bolts & nuts · Ø Internal connection: 24.5 mm · Mounting type: Nuts & bolts · Color: black · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Number of fixing points: 4 pcs
EUR 153,50
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Surface: nickel-plated · Thread length: 4 mm · Number of components: 2 pcs
EUR 2,35
NTN 6203 C3 Ball bearing 17/40/12
Bearing cage: Sheet steel cage ball-guided · Stock number: 6203 · Inner ring width: 12 mm · Manufacturer: NTN · Bearing clearance: C3 · Groove ring: No · Area of application: Standard · Material: Steel · Ø outside: 40 mm · Bearing type: Deep groove ball bearing · Width: 12 mm · Surface: blank · Ø inside: 17 mm · Ball bearing closed: No
EUR 10,50
66HEROES Exhaust bracket 100 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 130 mm · Surface: electropolished · Thickness: 4 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Hole spacing: 100 mm
EUR 15,20
Not in stock
swiing® ingenious gasket outlet Ø 26.5 mm with steel ring graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Material: Steel · Thickness: 2.6 mm · Ø mounting hole: 6.5 mm · Ø inside: 26.5 mm · Place of use: Outlet · Number of fixing points: 2 pcs · Hole spacing: 42 mm
EUR 10,50
Exhaust manifold 28 mm chrome | Tomos A3, A35
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 28 mm · Total length: 325 mm · Surface: chrome-plated · Ø inside: 24.4 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 35,30
Collection only possible with online purchase and appointment.
