Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
| Surface | blank |
| Manufacturer | swiing® ingenious parts |
| Area of application | Performance, Racing, High End, Tuning |
| Material | Chrome steel (known as Nirosta®) |
| Ø outside | 117 mm |
| Ø inside | 71.8 mm |
| Ø bolt circle | 101 mm |
| Ø mounting hole | 5 mm |
| Thickness | 5 mm |
| Weight | 250 g |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Weight: 340 g · Mounting type: Screws
EUR 352,10
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 3 pcs · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Weight: 424 g · Mounting type: Screws
EUR 328,60
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
EUR 112,60
HPI stator ignition
Cable length: 640 mm · Manufacturer: HPI · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of cables: 4 pcs · Tension: 12 V · Surface: anodized · Color: black · Performance: 60 W · Number of fixing points: 6 pcs · Ø inside: 27.5 mm · Ø bolt circle: 80 mm · Ø outside: 90 mm
EUR 176,00
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Material: Aluminum · Surface: anodized · Manufacturer: swiing® ingenious parts · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Color: black
EUR 70,30
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Material: Chrome steel (known as Nirosta®) · Surface: blank · Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 101 mm · Ø inside: 71.8 mm · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Ø outside: 117 mm · Weight: 100 g · Number of fixing points: 4 pcs
EUR 23,40
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Height: 28 mm · Total length: 63 mm · Width: 100 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Number of fixing points: 2 pcs · Color: red
EUR 358,00
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11,60
EUR 25,78/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Weight: 340 g · Mounting type: Screws
EUR 352,10
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Material: Aluminum · Surface: anodized · Manufacturer: swiing® ingenious parts · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø inside: 39 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Color: black
EUR 70,30
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Material: Chrome steel (known as Nirosta®) · Surface: blank · Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 101 mm · Ø inside: 71.8 mm · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Ø outside: 117 mm · Weight: 100 g · Number of fixing points: 4 pcs
EUR 23,40
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 440,20
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Material: Aluminum · Surface: anodized · Manufacturer: swiing® ingenious parts · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Color: red
EUR 73,40
Collection only possible with online purchase and appointment.
