Sharpening stone set 5 pcs.

Sanding/brush set 12 pcs.

Drive shank Drill chuck: round · Ø drill chuck holder: 3 mm · Material: Nylon · Area of application: Workshop accessories · Number of components: 12 pcs

Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C

Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm

Dirko Dichtmasse rot (Silikon) Hochtemperatur 70 ml dauerelastisc

Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Area of application: Chemistry · Contents [ml]: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Color: red · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm

HPX wet sandpaper (P1200) 23 x 28 cm

Grain size: 1200 · Manufacturer: HPX · Area of application: Workshop accessories · Width: 230 mm · Total length: 280 mm

HPX wet sandpaper (P240) 23 x 28 cm

Grain size: 240 · Manufacturer: HPX · Area of application: Workshop accessories · Width: 230 mm · Total length: 280 mm

HPX wet sandpaper (P400) 23 x 28 cm

Grain size: 400 · Manufacturer: HPX · Area of application: Workshop accessories · Width: 230 mm · Total length: 280 mm

BGS grinding wheel set 35 pcs.

Drive shank Drill chuck: round · Ø drill chuck holder: 6.3 mm · Manufacturer: BGS · Area of application: Workshop accessories · Diameter: 50 mm · Number of components: 35 pcs

swiing® revival engine revision set (old model) | Puch E50

Manufacturer: NSK · Manufacturer: NTN · Manufacturer: swiing® revival parts · Area of application: Standard · Number of components: 7 pcs

GPO gasket cylinder base 0.35 mm original | Puch

Thickness: 0.3 mm · Place of use: Cylinder base · Manufacturer: GPO · Material: Oiled paper · Area of application: Standard · Nominal diameter: 47 mm · Ø inside: 47 mm · Hole pattern [mm]: 44 x 44 · Puch OEM number: 349.3.10.013.1

Magura shift segment 2-speed shifter | Sachs / Zündapp

Manufacturer: Magura · Material: Steel · Color: silver · Width: 14 mm · Height: 9.8 mm · Surface: galvanized (blue) · Total length: 34.2 mm

swiing® revival stud bolt set M6 x 106 mm | Puch

Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch OEM number: 360.1.10.034.1

Petrol hose clamp (Ø 8 - 9.3 mm) Standard

Material: Spring steel · Outer width: 5.3 mm · Surface: galvanized (blue) · Mounting type: Plug connection clamped · Color: silver · Ø inside: 7.5 mm · Clamping range: 7.6 - 9.3 mm · Ø outside: 9.5 mm

GPO valve caps piston black

Manufacturer: GPO · Material: Aluminum · Surface: anodized · Color: black · Diameter: 12.2 mm · Total length: 15 mm · Thread type: VG 8x32 (8x0.794 mm)

Karcoma fuel filter 24 mm plastic / paper

Manufacturer: Karcoma · Material: Paper · Material: Plastic · Filter type: Filter paper · demountable: No · Color: transparent · Color: yellow · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm · Total length: 35 mm · Total length: 60 mm · Ø inside: 4.7 mm · Ø outside: 24 mm

Oil seal NBR 15/32/5.5 A main shaft | Sachs 504, 505, 535 (A4216)

Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Material: NBR · Width: 5.5 mm · Ø outside: 32 mm · Surface: rubberized · Ø inside: 15 mm

Oil seal NBR 15/30/5.5 A crankshaft | Sachs (A4215 & A5602)

Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Place of use: Crankshaft · Manufacturer: Sachs · Material: NBR · Surface: rubberized · Width: 5.5 mm · Ø inside: 15 mm · Ø outside: 30 mm · Pony OEM number: A5602 · Sachs OEM no.: 0230 111 100

Oil seal NBR 15/35/7 AS crankshaft | Sachs 504, 535 (A4214)

Temperature resistance (min.): -30 - 100 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø outside: 35 mm · Surface: rubberized · Ø inside: 15 mm · Place of use: Crankshaft