Black racing handlebars in carbon look with bolted crossbar for your moped, moped and small motorcycle. The aluminum handlebar is mounted on the fork plate.
Both balance ends are slightly bent backwards, the left handlebar end is also knurled for additional grip. This extra-wide design gives you maximum control even at high speeds.
Height: 80 mm
Width: 820 mm
Ø tube: 22 mm
Length handlebar ends (for grip mounting): 235 mm
Length fork plate mount: 140 mm
Matching attachments such as clamps, steerer nuts, grips, etc. can be found in the accessories
.| Material | Aluminum |
| Color | Carbon |
| Clamping diameter | 22 mm |
| Width | 820 mm |
| Height | 80 mm |
| Mounting type | Fork plate |
| Fork plate holder length | 140 mm |
| Ø outside | 22 mm |
| Length handlebar ends | 235 mm |
| Crossbar | Yes |
| Ø Strut | 12 mm |
| Strut length | 240 mm |
Ratings
Accessories & related products
swiing® revival steerer tube nut M26x1 closed fork plate Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Height: 14 mm · Drive: External hexagon · Ø outside: 36.6 mm · Width across flats: 30 mm · Thread type: MF26x1 (fine pitch thread)
EUR 22,20
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 910 mm · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange · Number of fixing points: 4 pcs
EUR 176,20
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Total height: 54 mm · Ø inside: 14.5 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total length: 47 mm · Height flange center hole: 43 mm · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 14,00
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Thickness: 4.5 mm · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
EUR 23,40
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
EUR 11,60
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
EUR 11,10
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2,35
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Wheel size: 17 "
EUR 41,00
Collection only possible with online purchase and appointment.
