This aluminum cylinder, which is supplied with the matching cylinder head, is suitable for Piaggio Ciao, Bravo 1 and Boxer mopeds.
The 42 mm racing cylinder from Pinasco is one of the best cylinders for Piaggio currently available on the market. Perfect workmanship and detailed tuning characterize this 60 cc cylinder.
This racing cylinder has optimum power development in the high speed range due to its design and corresponding timing. As a result, it has slightly less torque at lower engine speeds.
The piston pin has a diameter of 12 mm.
Can be mounted on an original housing without any modifications.
In order to get the full performance out of this kit, we recommend installing an adapted engine housing. You can find this in the accessories section.
Quality product from the Italian manufacturer Pinasco.
| Nominal diameter | 42 mm |
| Manufacturer | Pinasco |
| Material | Aluminum |
| Surface | varnished |
| Displacement | 60 ccm |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 45.7 mm |
| Ø Outlet outside | 22.5 mm |
| Ø outlet inside | 18.5 mm |
| Number of fixing points | 3 pcs |
| Ø piston pin (B) | 12 mm |
| Outlet type | clamped |
| Hole pattern [mm] | 55 x 34 |
| Decompressor | Yes |
| Piaggio | Ciao - P , SC , PX , C24 Bravo / Super Bravo Boxer |
Ratings
Accessories & related products
Malossi MP-One engine case electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Color: silver · Ø inside: 24 mm · Ignition type: Electronic · Width: 104 mm · Ø outside: 140 mm · Total length: 220 mm · Height: 174 mm
EUR 262,90
Not in stock
Pinasco 46 mm cylinder kit incl. head 12 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 46 mm · Manufacturer: Pinasco · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
EUR 342,90
Pinasco *Competition* crankshaft Piaggio Ciao, SI, Bravo, Boxer (12 mm)
Manufacturer: Pinasco · Cheek type: standard · Ø coupling pin / vario pin: 12 mm · Crankshaft stroke: 43 mm · Connecting rod length center-center: 87 mm · Number of gears: 1 pcs · Total length crankpin ignition side: 91.5 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Thread type: M8x1.25 (standard thread) · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 / 15 x 14.8 mm (axe 12) · Wide crank webs: 32.5 mm · Length 1st paragraph: 22.2 mm · Length 2nd paragraph: 43.4 mm · Length 3rd paragraph: 62 mm · Area of application: Racing
EUR 302,90
Not in stock
Pinasco flywheel "Flytech" Carbon | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Pinasco · Material: Aluminum · Material: Carbon · Surface: varnished · Direction of rotation: right · Ø cone small inside: 12.4 mm · Ø Internal flywheel: 106 mm · Ø cone large inside: 14.5 mm · Ø Flywheel outside: 135 mm · Cone length: 12.5 mm · Cone ratio: 1:5 · Height: 38.7 mm · Thread length: 7.5 mm · Weight: 650 g · Thread type: MF16x1 (fine pitch thread)
EUR 240,00
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio Ciao, Bravo, Boxer
Nominal diameter: 42 mm · Manufacturer: Pinasco · Material: Aluminum · Surface: varnished · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.7 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.5 mm · Ø piston pin (B): 10 mm · Area of application: Tuning · Number of fixing points: 3 pcs · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes
EUR 377,20
Not in stock
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Nominal diameter: 42 mm · Manufacturer: Pinasco · Material: Aluminum · Surface: varnished · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Area of application: Tuning · Number of fixing points: 3 pcs · Outlet type: clamped · Decompressor: Yes
EUR 377,20
Not in stock
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank (10.9 strength)
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Diameter: 7.3 mm · Thread type: M7x1 (standard thread) · Total length: 120 mm · Thread length: 20 mm · Thread length: 30 mm · Strength class: 10.9
EUR 5,60
Explore categories from Cylinder
Collection only possible with online purchase and appointment.
