Removed spark plug cap in sporty blue for your moped, moped and small motorcycle.
The resistor in the spark plug cap prevents magnetic interference with the ignition and is particularly recommended when using an electronic ignition system (HPI, PVL, Selettra, VEC, etc.).
The copper terminal is placed over the ignition cable and then pushed into the plug.
The copper terminal is placed over the ignition cable and then pushed into the plug. As the ignition plug has a 6 mm SAE clamping receptacle, the end cap remains mounted on the ignition plug.
Details
| Ø cable | 7 mm |
| Manufacturer | NGK |
| Material | Silicone |
| Spark plug socket | SAE |
| Cable available | No |
| Color | blue |
| Suppressed | Yes |
| Resistance | 5 Ω |
| Component group Carburetor | Spraying |
Accessories & related products
Ignition cable Ø 5 x 450 mm (1A quality)
Ø cable: 5 mm · Manufacturer: Made in Germany · Total length: 450 mm · Material: Copper · Material: Plastic · Suppressed: No · Color: black · Component group Carburetor: Carburetor complete · Pony OEM number: A4603 · Sachs OEM no.: 0965 133 001
EUR 3,95
EUR 8,78/m
GPO 6V ignition coil | Hercules Prima, Optima
Place of use: External (outside the ignition) · Manufacturer: GPO · Area of application: Original · Area of application: Standard · Ø cable holder: 7.8 mm · Color: black · Number of fixing points: 4 pcs · Mounting type: Screws · Ø mounting hole: 5.2 mm · Hole spacing: 53 mm · BOSCH OEM number: 0212940
EUR 55,30
NGK CR4 Racing ignition cable & plug High End red
Ø cable: 7 mm · Manufacturer: NGK · Material: Silicone · Spark plug socket: SAE · Cable available: Yes · Suppressed: Yes · Color: red · Resistance: 5000 Ω · Component group Carburetor: Carburetor complete · Component group Carburetor: Spraying · Cable length: 500 mm
EUR 38,00
Moped fans like you also bought:
swiing® revival screw set PVL ignition
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M4x0.7 (standard thread) · Drive: Hexagon socket · Screw head: Cylinder head · Thread length: 25 mm · Thread length: 35 mm · Shank: No · Shank: Yes · Number of components: 6 pcs
EUR 5,65
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25,30
EUR 2.530,00/l
PVL ignition coil analog 105458 / 458115
Manufacturer: PVL · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Color: black · Place of use: External (outside the ignition) · Number of fixing points: 2 pcs · Ø mounting hole: 6 mm · Mounting type: Screws
EUR 114,20
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of cables: 2 pcs · Color: black · Number of fixing points: 3 pcs
EUR 114,20
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats SW: 21 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 7,50
swiing nozzle set M5 (32 - 50) Dell'Orto SHA, PHBG
Manufacturer: swiing · Total length: 8 mm · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Drive: Slot · Quantity: 10 pcs · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 32 · Nozzle size: 34 · Nozzle size: 36 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50
EUR 24,10
Collection only possible with online purchase and appointment.
