Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The height or preload of the shock absorbers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 240 mm
With the plastic bushes supplied, the diameter at the attachment points can be reduced from 10 mm to 8 mm.
The rear springs should always be secured with large washers so that the plastic bushes of the suspension struts do not move if lateral forces occur.
| Manufacturer | MKX |
| Material | Steel, Aluminum |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Mounting type | Nuts & bolts |
| Adjustable | Yes |
| Ø Fastening inside | 8 mm, 10 mm |
| Ø spars | 24 mm |
| Ø outside | 46 mm |
| Hole spacing | 320 mm |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25,70
EUR 2.570,00/l
YSS shock absorber Racing 32 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Ø outside: 53 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Hole spacing: 355 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 164,00
MKX shock absorber 32 cm chrome
Manufacturer: MKX · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Hole spacing: 320 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 58,50
Moped fans also bought
Not so nice 
Luggage carrier black | Puch Maxi S
Material: Steel · Color: black · Surface: varnished · Mounting type: Nuts & bolts · Total length: 425 mm · Width: 168 mm · Height: 32 mm · Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm · Hole spacing: 29 mm · Wheel size [inch]: 17 " · Number of fixing points: 4 pcs
EUR 23,30
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Material: Steel · Surface: varnished · Ø outside: 12.5 mm · Color: black · Total length: 420 mm · Height: 35 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 8.1 mm · Hole spacing: 410 mm · Width: 170 mm
EUR 35,00
KMC drive chain black 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Color: black · Color: gray · Surface: varnished · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.96 mm
EUR 26,80
DMP clutch "Racing" aluminum reinforced | Puch E50
Thickness: 22 mm · Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Ø outside: 94 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 140,50
Collection only possible with online purchase and appointment.
