High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Total length | 175 mm |
| Width | 108 mm |
| Height | 11 mm |
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Thread length | 6 mm |
| Mounting type | Nuts & bolts |
| Ø mounting hole | 6 mm |
| Hole spacing | 50 mm |
| Number of fixing points | 9 pcs, 2 pcs |
Accessories & related products
Plastic license plate holder (CH version)
Total length: 175 mm · Width: 108 mm · Height: 11 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Mounting type: Nuts & bolts · Ø mounting hole: 6 mm · Hole spacing: 50 mm · Number of fixing points: 9 pcs
EUR 9,25
Serrated lock washer M4 - M12 galvanized
Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0,35
M6x22 hexagon head screw, galvanized
Width across flats SW: 10 mm · Total length: 26 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Color: silver · Drive: External hexagon · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Thread length: 22 mm · Strength class: 8.8 · Area of application: Standard
EUR 1,30
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Drive: Hexagon socket · Total length: 13 mm · Screw head: Lens head · Thread type: M5x0.8 (standard thread) · Ø External head: 9.5 mm · Width across flats SW: 3 mm · Thread length: 10 mm · Shank: No · Strength class: 10.9
EUR 1,05
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
EUR 2,35
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Valve type: TR6 car valve
EUR 17,00
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 35,10
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Area of application: Original · Area of application: Standard · Test mark: none · Housing material: Plastic · Color: black · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Number of fixing points: 2 pcs · Bulb holder: P26s · Ø External connection: 6.3 mm · Speedometer recording: 48 mm · Depth: 147 mm · Battery operated: No · Switch included: Yes · Width: 125 mm · Mounting type: Screws · Height: 90 mm · Piaggio OEM number: 584240
EUR 44,40
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Number of fixing points: 2 pcs · Bulb holder: BA9s · Depth: 43 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Width: 130 mm · Mounting type: Nuts & bolts · Height: 58 mm
EUR 22,20
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 23,30
Collection only possible with online purchase and appointment.
