A pair of side mirrors made of aluminium, in carbon look, for side mounting on the handlebars of your moped, moped and small motorcycle.
The mirror glass frame is made of aluminum, covered with carbon foil. The mirror rod is also made of aluminium, but black anodized.
All screws are made of stainless steel (Inox).
Both mirrors are adjustable and can be used on the left or right. The handlebar end mirrors are inserted into the side of the handlebar and fixed in place with the screw. Suitable for all handlebars with an outer diameter of 22 mm.
Mirror length: 106 mm
Mirror height: 55 mm
Mirror bar length: 55 mm
Mirror clamp thread: M8
Ø bushes (relaxed): 17.2 mm
Alternative handlebar – end mirrors as well as classic variants can be found in the accessories
.| Material | Aluminum |
| Thread type | M8x1.25 (standard thread) |
| Color | Carbon |
| Mirror surface length | 106 mm |
| Wide mirror surface | 55 mm |
| Mirror rod length | 55 mm |
| Thread size | M8 |
| Clamping diameter | 17.2 mm |
Accessories & related products
66HEROES mirror mount M10 aluminum black
Material: Aluminum · Surface: anodized · Color: black · Total length: 40 mm · Width: 16 mm · Height: 36 mm · Manufacturer: 66HEROES · Thread type: M10x1.5 (standard thread) · Internal thread: M5x0.8 (standard thread) · Thread size: M10 · Clamping diameter: 22 mm
EUR 31,50
Moped fans also bought
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Material: Brass · Material: Steel · Nipple shape: Barrel (transverse) · Nipple length: 5.5 mm
EUR 4,00
Not in stock
swiing® revival light switch MERIT two buttons
Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Total length: 55 mm · Width: 27 mm · Height: 30 mm · Manufacturer: swiing® revival parts · Substructure material: Plastic · Housing material: Steel · Ø Handlebars: 22 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs
EUR 22,20
Not in stock
Continental 2.00 - 2.50 x 17" tube
Valve type: TR6 car valve · Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Wheel size [inch]: 17 "
EUR 17,50
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 2200 mm
EUR 11,60
swiing® revival 16" front fender primed | Piaggio SI
Material: Steel · Surface: primed · Color: black · Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Wheel size [inch]: 16 " · Piaggio OEM number: 267651
EUR 40,90
Alligator end piece for inner cable aluminum red (per piece)
Material: Aluminum · Surface: anodized · Color: red · Total length: 12 mm · Manufacturer: Alligator · Ø outside: 2.9 - 4.1 mm · Number of connections: 1 pcs · Number of components: 1 pcs · Ø inside: 2.3 mm · Area of application: Workshop accessories
EUR 0,60
Collection only possible with online purchase and appointment.
