Clutch springs in three thicknesses for the Jammer clutch on your Puch and Tomos moped / moped.
As the original springs tend to break, they can be replaced by Malossi springs.
The springs are supplied in 3 thicknesses:
Weak (white): 2.25 mm, 32.65 mm
Medium (yellow): 2.28 mm, 32.3 mm
Strong (red): 2.42 mm, 32.0 mm
We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
You can find more clutch springs in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Spring design | Tension spring |
| Ø wire | 2.2 mm, 2.3 mm, 2.4 mm |
| Manufacturer | Malossi |
| Material | Spring steel |
| Area of application | Tuning |
| Surface | varnished |
| Color | white, yellow, red |
| Total length | 32.6 mm |
| Puch | E50 |
| Tomos |
Accessories & related products
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Ø outside: 92.5 mm · Manufacturer: Jammer · Area of application: High End · Area of application: MX · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Steel · Thickness: 19 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 222,60
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Tomos OEM number: 227849
EUR 222,60
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Thickness: 4.5 mm · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
EUR 23,30
swiing® revival 12 mm carburetor (original) | Puch
Width: 50 mm · Height: 108 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Component group Carburetor: Carburetor complete · Color: gray · Nominal diameter: 12 mm · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Total length: 65 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 81,90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4,55
swiing® ingenious pull starter | Puch E50 MVT ignition
Height: 82 mm · Width: 150 mm · Ø outside: 130 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Total length: 170 mm
EUR 175,70
Not in stock
Collection only possible with online purchase and appointment.
