Hot 
Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi S, N and X30 Velux (except Ur-Velux) moped / moped.
The wheel hub is from new production.
The brake anchor plate was produced again in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with deep groove ball bearings and an M11 axle.
The 36 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing them with a high-quality alternative from the accessories range.
Details
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø drum | 80 mm |
| Ø outside | 115 mm |
| Ø axle | 11 mm |
| Axle length | 160 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Number of spoke holes | 36 pcs |
| Ø spoke hole | 3.7 mm |
Suitable for the following models
| Puch |
Accessories & related products
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Color: silver · Ø drum: 80 mm · Width: 105 mm · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Ø axle: 12 mm · Ø bolt circle: 105.5 mm · Total length: 185 mm · Ø outside: 115 mm · Number of fixing points: 6 pcs · Area of application: Standard · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
EUR 111,40
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs
EUR 3,30
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs
EUR 2,80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,60
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11,60
EUR 25,78/l
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Ø inside: 12 mm · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 28 mm · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Area of application: Standard · Width: 8 mm · Stock number: 6001 · Bearing type: Deep groove ball bearing · Ball bearing closed: Yes
EUR 6,90
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Manufacturer: GPO · Quantity: 36 pcs · Material: Chrome steel (known as Nirosta®) · Surface: raw · Color: silver · Length from hook: 188 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Nominal diameter (thread): 3.15 mm · Thread length: 11 mm · Nipple length: 14 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 64,50
Collection only possible with online purchase and appointment.
