Sealing washer 5 x 10 x 2 mm for the carburetor flange of Bing SSB carburetors, which are installed on Sachs 502, 50/2, 50/3, 50/4 mopeds / mopeds.
The washer acts as an insulating washer to keep heat away from the carburetor and also as an additional sealing washer.
The aluminium washer has an EPDM rubber ring vulcanized onto it. This fits perfectly against the sealing surface and encases the stud bolt.
Ø inner: 4.6 - 5.7 mm
Ø outer: 10 mm
Height: 2.9 mm
Material: aluminum & EPDM rubber
Price per piece.
Original Sachs spare part number: A1829
| Material | Aluminum, EPDM - Rubber |
| Nominal diameter (thread) | 5 mm |
| Nominal diameter inside | 5 mm |
| Pony OEM number | A1829 |
| Sachs OEM no. | 0250 089 000 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
Cap nut M5 Inox
Material: Chrome steel (colloquially known as stainless steel) · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Nominal diameter (thread): 4 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 10 mm
EUR 0,95
Serrated lock washer M5 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0,35
Hot 
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 13 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 75 · Mounting type: Flange · Hole spacing inlet: 31 mm · Total length: 132 mm · Width: 87 mm · Height: 85 mm · Area of application: Standard · Area of application: Tuning
EUR 149,30
Explore categories from Screws & fastener sets
Moped fans also bought
M10 sealing ring Fiber
Material: Fiber · Surface: raw · Ø outside: 13.8 mm · Ø inside: 10 mm · Place of use: Carburetor · Place of use: Motor housing · Thickness: 1.6 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000 · Puch OEM number: 27071
EUR 1,90
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Diameter: 4.9 mm · Thread length: 6 mm · Thread length: 12 mm · Total length: 23 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2,10
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Thickness: 0.4 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Width: 130 mm · Total length: 210 mm · Number of fixing points: 5 pcs · Number of components: 1 pcs · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
EUR 6,95
swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Total length: 26 mm · Thread length: 7 mm · Thread length: 14 mm · Width across flats: 8 mm · Strength class: 8 · Strength class: 10.9 · Drive: External hexagon
EUR 6,70
Working late? Evening hours on Thursday until 20:00
