Silver vintage mufflers with chrome-plated cover caps for your moped, moped and small motorcycle.
These mufflers are perfect for the old-school look.
Length (mount - mount): 280 mm
Ø outer cover sleeve: 40 mm
Ø uprights: 28 mm
Ø bushings for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting in the event of lateral forces.
The scope of delivery corresponds to one pair.
Rear springs in other designs, fastening material and washers can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
| Manufacturer | IMCA |
| Color | Chrome |
| Damping type | Spring |
| Adjustable | No |
| Ø outside | 40 mm |
| Ø spars | 28 mm |
| Surface | chrome-plated |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Mounting type | Nuts & bolts |
| Hole spacing | 280 mm |
| Total length | 310 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25,80
EUR 2.580,00/l
36 cm Chrome/Black Shock Absorber with Cover Cap | Puch VZ50
Surface: chrome-plated · Color: Chrome · Color: black · Damping type: Spring · Mounting type: Nuts & bolts · Ø spars: 30 mm · Ø outside: 52 mm · Ø outside: 60 mm · Adjustable: No · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 390 mm · Number of fixing points: 2 pcs · Hole spacing: 360 mm · Puch OEM number: 368.4.21.050.0
EUR 125,80
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Surface: galvanized (blue) · Screw head: Hexagon · Nominal diameter (thread): 8 mm
EUR 14,00
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 8 mm
EUR 21,10
MKX shock absorber 28 cm chrome
Manufacturer: MKX · Material: Platinum · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Total length: 310 mm · Surface: chrome-plated · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 280 mm
EUR 58,70
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Mounting type: Nuts & bolts · Ø spars: 280 mm · Adjustable: Yes · Ø Fastening inside: 10 mm · Total length: 310 mm · Number of fixing points: 2 pcs · Hole spacing: 280 mm
EUR 152,90
Explore categories from Shock absorber & swingarm
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes
EUR 11,70
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard · Nipple length: 5 mm
EUR 2,80
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Surface: nickel-plated · Screw head: Lens head · Thread length: 4 mm · Total length: 6 mm
EUR 2,35
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Surface: galvanized (blue) · Width across flats: 10 mm · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8,70
Working late? Evening hours on Thursday until 20:00
