
Grip covers with finely textured leather look in red-brown color for your moped, moped and small motorcycle with automatic transmission.
This grip set includes one grip cover each with 22 and 24 mm inner diameter.
Ø inside: 22 / 24 mm
Total length: 130 mm
Material grip ends: Aluminum
For manual mopeds with 24 mm inner diameter on both grips, two grip sets must be ordered.
To make installation easier, we recommend heating the grip rubber slightly or spraying the inside with GPO Grip Spray.
Further grip sets and the aforementioned spray can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Ø inside | 22 mm, 24 mm |
| Color | brown, red |
| Total length | 130 mm |
| Manufacturer | GPO |
| Material | Imitation leather, Aluminum |
Accessories & related products
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø Cable bushing: 2.3 mm · Total length: 15 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Width across flats: 7 mm · Area of application: Standard
EUR 2,95
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
EUR 2,85
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
EUR 2,35
Wheel axle set M12x1 x 165 front
Manufacturer: Quenching · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Total length: 165 mm · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø shaft: 11.9 mm · Thread length: 25 mm · Thread length: 26 mm · Shank length: 114 mm
EUR 17,40
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 10 mm · Area of application: Standard · Piaggio OEM number: 270460
EUR 2,85
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Total length: 200 mm · Width: 130 mm · Number of components: 1 pcs · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6,40






