
Black pair of handlebar grips with yellow Flame decor.
One set consists of one grip cover with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, you must therefore order two grip sets. The grip ends are closed, but can be opened individually if required (e.g. for mounting a side mirror).
Total length of rubber grip: 125 mm
To make mounting easier, we recommend heating the rubber grip slightly or spraying it with hairspray on the inside.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Rubber |
| Color | yellow, black |
| Ø inside | 22 mm, 24 mm |
| Ø outside | 50 mm |
| Total length | 125 mm |
Accessories & related products
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Ø outside: 22 mm · Width: 730 mm · Height: 400 mm · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Mounting type: Fork plate · Ø Strut: 14 mm · Strut length: 320 mm
EUR 42,50
Handlebar fork plate 15 cm cross chrome
Material: Steel · Color: Chrome · Height: 150 mm · Ø outside: 22 mm · Surface: chrome-plated · Width: 710 mm · Clamping diameter: 22 mm · Fork plate holder length: 110 mm · Mounting type: Fork plate · Length handlebar ends: 155 mm · Crossbar: Yes · Ø Strut: 12 mm · Strut length: 220 mm
EUR 29,50
GPO light switch with wiring harness base chrome version
Cable length: 970 mm · Number of cables: 5 pcs · Manufacturer: GPO · Material: Plastic · Color: Chrome · Housing material: Steel · Surface: chrome-plated · Substructure material: Steel · Width: 30 mm · Height: 25 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Total length: 50 mm · Number of positions: 3 pcs · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm
EUR 20,00
Explore categories from Handles & fittings
Moped fans also bought
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 106,50
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Place of use: Frame (+ tank) · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
EUR 11,10
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11,70
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Total length: 6 mm · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
EUR 18,80







