Transparent float chamber compatible with Bing SRE, SRC, SRF, and SRA 1/11/35 carburetors. This float chamber was installed on Puch Maxi, X30, Velux, Sachs, and Zündapp Belmondo mopeds, among others.
Thanks to the transparent material, you can always keep an eye on the fuel mixture, immediately see the float level, and check for any deposits forming in the chamber.
The float cover can be permanently installed. When tightening it, make sure to tighten it only slightly by hand, just as with the original cap.
Outer diameter: 44 mm
Total height: 31 mm
Wrench size (SW): 19 mm
You can find the original float cap as well as various maintenance products for your carburetor in the accessories section.
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SRE, SRC, SRF |
| Height | 31 mm |
| Ø outside | 44 mm |
| Number of fixing points | 1 pcs |
| Width across flats | 19 mm |
| Puch | |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Height: 32.5 mm · Ø outside: 43.5 mm · Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Width across flats: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
EUR 22,20
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Ø outside: 45 mm · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3,30
BING 15 mm Bing original carburetor (1/15/46A)
Nominal diameter: 15 mm · Manufacturer: BING · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 156,40
Hot 
GPO gasket set carburetor Bing SRE
Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
EUR 5,75
BING Carburetor cover Bing SRE (original)
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRE · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
EUR 18,70
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Ø outside: 36.5 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Color: white · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 35,20
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
EUR 2,80
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Ø outside: 45 mm · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3,30
BING rubber grommet Ø 8 mm carburetor pipe bend
Manufacturer: BING · Material: Rubber · Ø outside: 12 mm · Total length: 29 mm · Ø inside: 8 mm · Color: black · Clamping diameter: 4 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4,60
Hot
GPO gasket set carburetor Bing SRE
Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
EUR 5,75
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 94,00
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Ø outside: 36.5 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Color: white · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 35,20
Working late? Evening hours on Thursday until 20:00
